Questions & Answers for: Toshiba Satellite half of display

...display is about a half inch truncated on the right side from top to bottom. On some monitors (typically desktops) there are buttons for centering the display, widening it horizontally or vertically, ...

display AND a yellow one around one inch to the right. ( half and inch from the pink line). My boss had the same laptop as me and he had a BUNCH more of lines in his screen. can barely see now..has to

...display screen is only showing half of my desktop, the other half goes black or flickers various colors. Do I need to replace the display screen or the video card? Try connecting to an external ...

...half the screen is black. Your Laptop screen has either too much of Moisture in it or the display circuit at the laptop folding place is creating issue. Please take the machine to Toshiba Service ...

display shows only half screen. Other half is ok. The bad side is just vertical bars top-to-bottom. Thanks, Jim This indicates a bad LCD screen, Hook a external monitor to the video output on the back

...half of de screen its blocked by blacki need the part number or de model of de display for replace my display Just a quick note, before you go replace the entire screen, make sure it's not just a ...

Screen half black Laptop runs Windows XP. Will boot up but only left screen seems normal which displays icons. Right half is black. either the screen has gone or been damaged or check the screen cable

half is fine whats going on ? Sounds like the screen is going bad. Isolate the problem by plugging an external monitor to the laptop. Borrow a monitor from a neighbor, friend, relative or co-worker to

half black screen with white lines check the display on external monitor, if its ok , then its fault of either the display cable that gives display to the lcd of laptop or the screen becomes faulty

...half is visible and very large, try right click on your desk top then personalize or settings depending on your operating system then go to display and display settings and change the settings ...