Questions & Answers for: fix low water pressure karcher

Question about 2500 PSI Pressure Washer

8 Answers

...fix it for ya and no tracking down parts... I have the same unit. Can not find a parts diagram. In the above picture, to the right of where it's broken, there is a gold spring, (piston?). this is ...

Ad

Question about K2.26 Electric Power Washer

1 Answer

...low pressure. Turn pressure up and it starts to turn itself on and off about everyu second Dear mike husband, One reasin for this fault could be a damaged lance or turbo lance. Try by replacing with ...

Ad

Question about K2.26 Electric Power Washer

1 Answer

...may be the oil. if the oil is fine then try crimping your hose to let less water pressure through. if that still does not work lowes or home depot will fix the problem cheap. thank you for using ...

Question about K2.26 Electric Power Washer

1 Answer

...FIX...or USE???? I will assume that you wish to know how to use it. First without water connected and without gun connected...switch on the machine. If it turns, then this means the electric motor is ...

Question about PSI Electric Pressure Washer

1 Answer

low pressure leak out of bottom when trigger is actuated and causes pressure switch to cycle when the trigger is released. Any Help? This pressure washer is approx 18 months old! You gave a very close

Question about PSI Electric Pressure Washer

1 Answer

...low oil cut off stitch, make sure the oil is clean and full, and the switch wiring is tight. Next is bad gas, water remover and octane booster can fix this, finally, replace the spark plug, as they ...

Question about PSI Electric Pressure Washer

2 Answers

...low water pressure Can I fix it?Thanks i fixed mine works good easy too watch my video step by step i put it on ...

Question about K2.26 Electric Power Washer

2 Answers

low water pressure from the hose? I do not have specific experience of your machine. However, the high pressure pump will be controlled by a pressure switch on the high pressure outlet to the pipe and

Question about K2.26 Electric Power Washer

1 Answer

...low presure and how to fix it thanks 1 water inlet filter clean ?? not limed or ?? 2 nozzle clean. 3 pressure control valve properly screwed Sometimes water hoses are provided with a slot at the hose ...

Question about K2.26 Electric Power Washer

2 Answers

...water flow will be correct but the pressure will be low. Use to small of a nozzle, the power needed to get the volume of water through the nozzle will be to much for the power of the engine. Hence it ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...