...half. This will allow you to put the camera back together and help prevent the new LCD screen from falling back out. The LCD screen has pads attached to the surface behind it. When you reinstall the ...
...half. This will allow you to put the camera back together and help prevent the new LCD screen from falling back out. The LCD screen has pads attached to the surface behind it. When you reinstall the ...
...half. This will allow you to put the camera back together and help prevent the new LCD screen from falling back out. The LCD screen has pads attached to the surface behind it. When you reinstall the ...
...Because when the front cover is removed with the 5 screws and not 4 the whole darn circuit board falls out and its hard to get the plastic protective strips covering the top and bottom to align ...
...half. This will allow you to put the camera back together and help prevent the new LCD screen from falling back out. The LCD screen has pads attached to the surface behind it. When you reinstall the ...
Question about EasyShare C613 Digital Camera
ribbon cable. The white and pink cables are hi-voltage cables. Under the display, there are four screws that needs to be removed. Finally, I have access to the lens. Now, I have to remove three (maybe
Question about EasyShare M1093 IS Digital Camera
...ribbon cable from screen, then gently pull screen off. Do be careful because the screen layers likes to fall apart and then it's really confusing if this happens. But Kodak will do it for $50 if you ...
Question about EasyShare M1093 IS Digital Camera
...as it were, as long as you are careful, usually if you locate all the screws etc, it sort of "Falls apart" or at best, a thin, knife of plastic will usually pop the case apart, NEVER force it. ...
...ribbon cables, or cracking LCD screens. Fix #6a: This is a variation of Fix #6, and should be tried if the lens barrels appears straight (not crooked). In other words, try this if there's no obvious ...
ribbon sticks to paper jamming machine 6800 kodak thermal printer There was firmware update needed to use a change in the media as Fall 2010. I don't know why the firmware update was needed but if you
Usually answered in minutes!
601 Questions
559 Questions
492 Questions
428 Questions
435 Questions
