Question about D70 Digital Camera with 18-50mm Lens
...error message displayed on an SLR camera mean? The "fEE" error indicates that the camera is not communicating with the lens. The lens may not be attached to the camera properly, or if it has an ...
...error. The camera is not reading the lens. Depending on which lens you are using, it may be very simple. If the lens has an aperture ring you can adjust, make sure it is set to the minimum f-stop ...
...message. I cannot take a picture with it. There are settings for auto " focus/manual" and "full/limit". Am I not doing something?? Robert make sure the aperture ring on the lens is set to the minimum ...
Question about D80 Digital Camera with 18-135mm Lens
...error indicates that the camera is not communicating with the lens. The lens may not be attached to the camera properly, or if it has an aperture ring, it may not be set to f22 (or the highest ...
Coming with a FEE error using a 35X105mm lens, tried setting lens at f22, doesn't seem to make a difference. From the lack of a response, I'm assuming the aperture lock did the job.
Question about D80 Digital Camera with 28-80mm Lens
...F22, it reads FEE, error. "I have nikon d80 with the fEE error code blinking... I know this means that the aperture is not locked at the 22 but it will not allow me to change the aperture settings. ...
f22. If it is ERR, page 132 of the manual reads "Err blinks, Camera Malfunction. Press shutter-release button again. If error persists, consult with Nikon authorized service representative." You could
...on the highest f-stop (F22 or F32). there is a small lock that will lock the aperture ring in this position. if the camera thinks the ring is not in the "highest" "F" position you will get the
Question about D90 Digital Camera with 18-105mm lens
on my d90, under M (manual mode or aperture priority), the aperture on the readout goes beyond the actual aperture range; i.e. f3.5 - 5.6; readings will show aperture range of 5 - 29 when I scroll ...
error is telling you that the aperure ring is not at the smallest setting(largest "F" number, most likely F22. turn the ring to F22 or whatever is the biggest number and it will work. there might also
Usually answered in minutes!
671 Questions
616 Questions
504 Questions
483 Questions
426 Questions
