Questions & Answers for: dewalt 3800

DeWalt 3800 Pressure Washer Runs 20 min then quits. Runs great for 20 mins, then power loss. After "cool down" machine okay. I have the same problem and even have the issue with gas cap off.

Need to know type of oil DeWalt pressure washer 3800psi Pump is specialty pump oil available at Home Depot. Engine is 10W 30 motor oil.

Dewalt 3800 PSI operates great until gas tank is half full then cuts off. Can not pull cord until all pressure is released and hose disconnected. Will start again but will not stay on for more then a ...

dewalt 3800 psi model. purchased 2 yrs ago. If the engine turns rather freely and not hindered by malfunction of pump, then it should start. Since you are going to rebuild pump, you should just remove

what type of oil do i use in a dewalt 3800 pressure washer in the enginge you can use a standard 4 stoke engine oil. in the pump you can use hydraulic oil

...Dewalt 3800 4.0 gpm loosing oil which looks to be coming out between the cat pump and engine Could the O rings be worn or dry rotted Only used like twice a year at the school Im at Kleen- rite has a ...

Dewalt 3800 psi This is the second 3800 dewalt in 2wks I have made sure its getting at least 5gpm by timing 5gal bucket fill over 5gallons in under 40seconds and made sure pump was full before startup

I can not get the soap to come out on my JD 3800 psi. I have the siphon hose and screen, and the correct tip, black. Thank you Soap may be too thick. There may be a click/slide setting with the wand ...

Have a dewalt 3800. what do you use to get the pump oil plug off to fill with oil. It's a gold plug on top of pump page 15 DeWalt DPD3800 Instruction Manual Nozzle Cleaning

Dewalt 3800 pressure washer got no fire to the spark plug WHAT DOES DEWALT TECH SUPPORT TELL YOU Try disconnecting the oil level switch. Unplug the black kill wire and try to start.