dehumidifier does not fill up with water anymore I have a whirlpool ss207 model, I recently changed filters thinking that was the problem. The problem is it does not draw in any water anymore If your ...
...dehumidifier 54501 not filling with water seems to shut off quickly if your humidity level is not highin the house or room you are using it in your humidistat will shut it down try turnning system up ...
...dehumidifier, model # 2535030000, let it run for a couple of days, and it's not filling up. All the lights turn on, and the fan runs. There is over 70% moisture in the room. What might need repair or ...
...dehumidifier i think 6000 model and it appears to work fine. the fan runs ok the compressor seems to kick in ok but the tank will not fill. i had it on in my room for approx 30 mins and nothing ...
fill up with water. Is the condensor gone and if so, is it worth fixing? If the room temperature is close to 60, the coils may be frozen (completely encased in ice). If this is the case, move it where
...fill up. does this mean a refrigerant leak? where are the coils that are suppose to get cold? In the front of the unit? Hi, There are many reasons why a dehumidifier will not work or collect water. ...
...can try any of these: Warm up the room the dehumidifier is in. Put the dehumidifier on a sturdy table (the room air is coolest near the ground). Turn the unit off until the room warms up. Take
...you can try any of these: Warm up the room the dehumidifier is in. Put the dehumidifier on a sturdy table (the room air is coolest near the ground). Turn the unit off until the room warms up. Good ...
...the dehumidifier. But if the unit runs constantly and the water container has to be emptied daily, there's just a lot of humidity in the room and the dehumidifier is doing what it's supposed to
Question about DDR6009REE 60 Pints Energy Star compliant Premiere Dehumidifier, w/ Remote, Time delay Auto protection, Auto Re-Start, Auto Defrost & Continuous Drain, R410A Refrigerant, Covers up to 3,600 sq ft
Dehumidifier is about 5 yrs old...worked well,until a couple of months ago...now the bypass to the well is not working, and the bucket fills up...P1 and P2 errors appear when it is full... well if the
Usually answered in minutes!
312 Questions
314 Questions
258 Questions
200 Questions
154 Questions