Questions & Answers for: control lock flashing kitchenaid dishwasher

control.....cost 110$ I got the same problem that started 2 days ago. Holding the Energy Saver Button for the 4 seconds does nothing. The dishwasher does not operate and the light flashes continuously

...Lock LED on solid or the Energy Saver Dry LED flashing. Tried holding down Energy Saver Dry for 5 sec. Its either one of those two conditions. Disconnected power for several hours no luck. Suspect ...

...Control Panel is not functioning; "Child Lock" light is flashing; I tried pressing "Energy Saver" for four seconds...no effect; I tried shutting off breaker for five minutes...no effect. WASH THE ...

...saver dry should of unlocked it, since it didn't that means your control panel keypad assembly is bad. Ref. ...

...control lock button and now i cannot get the control light button to turn off either. Try the follow key dance, all within 5 seconds push: HEATED DRY --- NORMAL ---- HEATED DRY --- NORMAL wait for ...

...control lock light on? Then press Energy Saver Dry button for 4-5 secs. Are some lights flashing and dishwasher will not start? Have you tried to turn mains power off and back on? If you think the ...

CONTROL LOCK button for 3 seconds. The Control Lock light will stay on for a short time, indicating that it is activated, and all buttons are disabled. If you press any button while your dishwasher is

control locked light flashes Itindicates a possible problem with the water temperature in the dishwasher.

flashing or any other for that matter? Either way it sounds like the control board is locked up. There are many posts on here about how to reset it. Try the following: With the door open: Push Hi Temp

...Control lock button flashing. Model W10579129A the door is closed tightly. What could be the problem? Hello. From what you're describing, you've locked yourself out of using the dishwasher, lol. Look ...