...bleeder valves to vent air, you may have to temporarily loosen a heater hose to get all the air out of the system...Also check to see if there is water in the oil...If there is water in the oil then ...
...push the clutch pedal to the floor and hold open the bleeder screw and purge the air keep repeating untill there is no air in the system tighten the bleeder screw and top up the fluid hope this ...
clutch master/slave system). Then, open up the bleeder and depress the pedal. Have a friend or assistant tighten up the brake bleeder screw after depressing, and release the pedal. Do this a few times
...clutch pedal, fit a bleeder pipe on the nipple and open the bleeder until the fluid stops flowing. Repeat this process until no more bubbles are seen in the bleeder tube. Be careful to not let the ...
Usually answered in minutes!
1,478 Questions
1,272 Questions
1,097 Questions
1,065 Questions
988 Questions