Questions & Answers for: Chevrolet close hood

heater wont blow warm air when hood is closed everytime i open the hood the truck immediately starts blowing hot air, the second the hood is closed it turns to cold air....any ideas at all??? its ...

...hood to close completely. The only thing holding it closed it the safety latch. Try "resetting" the lock. With the hood open-lube the lock good with wd-40 or similar and go pull the hood latch handle ...

close the hood. It would not close completely, though the initial latch did engage it would not close completely. I did remove the latch itself in order to lube it, thinking that it was only sticking.

...hood close out filler retainers. Remove the hood close out filler panel. Remove the upper radiator mount bolts. Remove the upper two hood latch support bolts. Remove the two lower hood latch support ...

...close the hood. if everything looks good try adjusting the hieght of the bumpers which the hood sits on. don't go crazy with adjusting the bumpers. What the problem probably is tho is a bad hood ...

hood will NOT shut or latch close inside cable may be stuck on open, it will not release so the hood closes all the way. make sure the cable is moving freely then spray wd-40 on the latch assembly and

Hood latch won't latch when closing Hood latch won't latch when closing Raise hood,have some one go pull hood latch and you look at latch and see if it releases,if it doesn't then ...

Chevy Prizm Hood Is Stuck Closed The hood on my 1999 Chevy Prizm is stuck closed. Pulling on the hood release latch inside the car does nothing. How can I manually open the hood? try pushing down on ...

Hood Open light will not go off There is a button located around the opening of the cars hood area that is pushed down when the hood is close, or around lock latch that is depressed when closed.

...Hood didn't close all the way and when I tried to open it will not open and will not close all the way If the plastic hood release handle inside is broken, can you reach the steel cable, if so, use a ...