Questions & Answers for: IBM check cable

Question about NetVista PC Desktop

2 Answers

...check all the cable and power cord connections to start and check that nothing was knocked loose when you were inside the computer. If applicable make sure the graphics card is seated in its slot. I ...

Ad

check cable. Its reboot failed. Changing the "Startup" menu doesn't help. What could be a cause is that my Thinkpad was dropped to my car seat while running. Thanks. plz check the hard disk data cable

Ad

Question about ThinkPad X60 Tablet PC

1 Answer

...check the cable This error indicates the hard drive is not detected or not plugged in. Open the case and see if the hard drive cabling is connected. Some SATA cables don't stay connected particularly ...

Question about RADIO S115 80G2715 Wireless Adapter

1 Answer

...should double check the operator panel cable, if this cable is misconnected you get this code, once you check both sides of the cable if the problem is still happen you must replace the operator ...

Question about 4230 Model 102 Matrix Printer

1 Answer

015 communication check cable check. it's show 015 communication check cable check. i already connect the line already why is that ? It's defective cable, change a new cable connector for your printer

Question about NetVista PC Desktop

1 Answer

...check cable IBM Netvista model 6842-50j not booting just showing PXE-E61 media test failure check cable. i have checked cable, hdd but it doesnt work. please solve my problem. thanks Your unit is ...

Question about Infoprint 1572 Laser Printer

1 Answer

...cable Check the thermistor cable for correct installation to J5 on the fuser card. If installed correctly, check for correct installation of J10 on the system board. If all cables are installed ...

Question about Netvista Intel Pentium 4 2.4GHz / 512MB DDR / 40GB HDD / DVD-ROM / 10/100Mbps LAN / Windows XP P (RBP42400XPP) PC Desktop

1 Answer

...cable with the blue plug) from the back of your monitor and check if you are getting monitor self test or if the monitor shows anything. If you do see something the monitor is fine, then please check ...

Question about x3400 Server

1 Answer

...check the cable connetion on the sererboard, hard drive, and RAID connector (if apply) If all are good, you may need to: A) Get a new cable or B) Check your BIOS setting to make sure it "sees" the ...

connected at the back port of the system. and can you hear the fan running sound from the system? It may also be possible that monitor cable has become loose.check the cable connection for monitor too

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top IBM Computer and Internet Experts

Brad Brown

Level 3 Expert

19187 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

ExpressFiX
ExpressFiX

Level 2 Expert

691 Answers

Are you an IBM Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...