Questions & Answers for: check cable

Ad

...check the cable connection. Ive tried it with a DVD and it looks perfect so its the cable. Im using Monster cable for all interconnects between the cable box and the TV so I dont think its a bad ...

Ad

Question about Deskpro 2000 PC Desktop

1 Answer

check cable When we turn on compaq computer we get Media Cable Failed check cable then it goes to a black screen and says non system disc or disc error Just check the hard disk cable that it is fitted

Ad

Question about 4230 Model 102 Matrix Printer

1 Answer

015 communication check cable check. it's show 015 communication check cable check. i already connect the line already why is that ? It's defective cable, change a new cable connector for your printer

Question about 4230 Model 102 Matrix Printer

1 Answer

...on another tv the same ps3, and same cable, then try another cable, check for quality/resolution. 3rd check for flat TV for specifications on HDMI cables, and resolutions supported( Samsung

Question about 4230 Model 102 Matrix Printer

1 Answer

...cable. 2nd check for each part of cable well connected, and no wires crossed on middle cable 3rd check same to the other end of cable. 4rd check the signal on diferent tvs around house (if available) ...

Question about 4230 Model 102 Matrix Printer

1 Answer

...check for correct cable and tv input (AV1,...) then check another tv, and change the cables if necessary, always check correct TV Input. if the dvd player is the same situation on diferent tv and ...

Question about 4230 Model 102 Matrix Printer

2 Answers

...Check the cable. Try to reseat the cable. Try to reverse the cable. If it still does not work. Go to control panel and check for any symbols like a question mark or exclamation point in the device ...

Question about 2007 Discover DTS-I

1 Answer

...need to check if your speedo drive is functional. Screw cable back to drive, lift front wheel and check if cable inner is turning, if it is you may need a new speedo. (spring worn like my old

Question about 2007 Discover DTS-I

1 Answer

cable is connected to your computer. Try resetting the connection or checking the connection if it's plugged in properly. Make sure that you can check both end (computer and monitor). If you need more

...check the cable by removing the cable that goes to the transfer case, you mite need some channel locks, not vise grips it will damage the nut or bolt head, you could also check the part of the cable ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76099 Answers

Cindy Wells

Level 3 Expert

5936 Answers

Marvin
Marvin

Level 3 Expert

85108 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...