...change the printhead if necessary you can squeez the little gray handles next to the cartridges ( one left of the CLI-36 and one right of the PGI-35) , lift the printhead handle and the printhead can ...
Question about Pixma iP4500 InkJet Printer
How do i remove a print head from my canon ip4500 printer? With power on, you lift the lid like you are changing ink, you remove all the inks and then lift the gray handle to release the printhead. It
Question about PIXMA iP4000 InkJet Photo Printer
...way. open the cover and wait til the inks come to the center, hold the resume button for a few seconds and it moves to the right a bit so you can reach the handle to lift up and change the
Question about MultiPASS MP730 All-In-One InkJet Printer
how do i remove the print head to replace with a new one You have to turn on the machine and lift the cover to bring the carriage to the center just like changing ink. You remove the inks and lift the
...realese toner crg.Remove empty toner crg, push back toner unit and lift handle. NOTE: when toner is empty machine guides you how to change toner on lcd display, you just need to look and press
change the toner cartridge? Open the front door. On blue toner handle, press plastic nose, and turn handle in right side. Pull out toner. Tip: place paper beaneath toner that residual toner dont spill
HOW DO WE CHANGE THE DRUM CANON IMAGERUNNER 1370F Hi, remove toner out, slide cover in left side, pull out the drum unit by metal wire hinge, on top of the drum are two blue handles wich you need to ...
...change a staple cartridge in a canon imagerunner 2870? first open upper front cover. then pull handle on left corner of front side, the sorter unit will come out. see behind side of sorter unit u'll ...
...change the paper size( from A3 to A4) without changing the drawer Hello, on the drawer you need to set the paper wide sensor ( blue handle ) must be on A4, also you need to put back rails and stopper ...
...buttons on the top of the scanner that say pdf but nothing happens when I hit them. How do I change it so the software will allow me to choose .pdf when I scan? You need to have a pdf-handling ...
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions