Questions & Answers for: Land Rover how to change a clutch

Question about 2002 Freelander

1 Answer

...clutch cylinders over the lst 18months. Rerservoir at the rear of engine compartment (difficult to get at) appears full. Any ideas on what might be wrong or how to improve the gear change? HI,YOU ...

Ad

Question about 1995 Discovery

1 Answer

...change the gears slowly. your clutch is the problem,i would suspect master cyclinder??could have trapped air in the system needs air removed ie;bleeding;;;;;; {you did fit a new clutch when gear box ...

Ad

...change shif gear,any suggestions what can be wrong with? thank you. sounds like a clutch release bearing, making noise... is it a standard transmission ? if so the only way to fix it properly is pull ...

...change master and slave (which is loads of money) what do you think? check and make sure the cable is not sticking first clutch on a freelander is fluid based . Dependent on which gearbox you have, ...

Question about 1997 Discovery

1 Answer

...clutch in to change gear nothing happens can't get into gear, restart car in gear. but when cool can change gear, but pedal feels odd now. what can i do to rectify it's an odd occurance but it sounds ...

...change the clutch and while you are at it i would also change the clutch arm and bush as they are prone to seizing causing a stiff clutch action and dropped peddle and slave cylinder failure , slave ...

Question about 2002 Discovery Series II

1 Answer

...being changed? what number ball bearing does it use? please help i am desperate without my car working!!! thank you! sorry to here that but no it has to come out and change the clutch release ...

Question about 1998 Discovery

1 Answer

clutch pedal stay on floor changed slave cylinder and just not sure if it hasn't been bled properly or if its something else? Did you bleed the clutch once you had changed the slave cylinder? If not ...

Question about 2002 Freelander

1 Answer

...the piston to come out more. FIX This is a sealed system. Cost from about £45.for system. Can be changed easly at the roadside 30 min no special tools ...

The Clutch disc and Release Bearing for the TD4-Freelander, were replaced recently. The Pressure Plate was still in a good condition.Gears difficult to engage.Please advise.Tks.John. I own a ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...