Questions & Answers for: Panasonic ch 26

No sound when recording channel 3 My VCR records properly but when recording channel 3, it only records the picture and not the sound. Is this when you are recording via CH 3 from a separate source? ...

...disc. ≥The unit may have a problem. With the power off, press and hold [∫] and [X, CH] at the same time on the main unit for about 5 seconds. Remove the disc and consult the dealer. ...

...a Service Code you need in order to set convergence and on this set it is not easy to enter! 1) Switch Antenna to cable (2) Set Sleep Timer to 30 mins,Exit menu Enter ch 124 (3) Now Press vol- on ...

...subsequent loss of more bbc dvb programes after scan for more progs, ie bbc1,bbc2,bbcnews,bbc mux ch 49 is the last in scan sequence, if i scan with no aerial & miss earlier mux ch, then ...

channel 4 is ch 8 and ch8 is ch 4 i have tuned the television on 2/12/09 and these two channels have reversed Did your cable company change the order to your channels? This is a rare problem.

2) While pressing and holding down VOL DOWN button on the TV, press and hold down the SPLIT DVD/VCR CH UP button on the remote until a message appears on the screen that the lamp timer has been reset.

Hi I have a panasonic stereo SU CH 80, it's the Hi I have a panasonic stereo SU CH 80, it's the split unit. Probably about 12 years old. it's displaying an E when in stand by- does anyone know

access service menu 26lxd52 Press & Hold Volume Dn & Ch Up buttons simultaneously for more than 5 seconds. If it do not help you, try an other method. The methods to access service menu to ...

the below instrucitions. 1. Unit power must be ON and unit must be in STOP mode. 2. Press and hold [CH UP] and [CH DOWN] ON THE UNIT for over five seconds. The unit will turn off. 3. Press [DVD POWER]

...for all remote , on a Panasonic PV-8661 vcr universal control one for all, program automatic search WITH ON TV AND AIMING TO CONTROL TO THE TV 1) Press TV 2) Press magic until 2 blinks followed