Questions & Answers for: causes hand wheel sewing machine

...wheel turns about 1/2 a turn and then just stops. see if it will work without the needle .. make sure the needle is not bent .. make sure you dont have a single (non zigzag) foot on the machine while ...

...hand and pressing the foot bulb to see if there is air pressure. I've seen them knicked with scissors, squished by chairs and the bulb itself damaged by scissors falling onto it. Ole Crone clearly ...

...wheel a quick turn, sort of a helping hand, I've found--especially on thick or heavy fabrics. Have you tried that? Here's a quick list of other things to check: 1. Is the belt too tight? It should be ...

hand with the power switched off, vary the speed you rotate it at. Can you feel the squeak as well as hear it? Is the turntable on a level surface and is the turntable itself level (parallel) with the

...wheel by hand. Watch what happens thru the plastic window in the bobbin area, or if you don't have a plastic window leave the bobbin covering off. Is the thread catching somewhere and causing a ...

...hand wheel towardsyou (counterclockwise) by hand and remove any thread in the bobbin case area. Alwaysturn the hand wheel towards you. Turning the hand wheel away from you(clockwise) can cause the ...

...hand-wheel that just spins? My Janome HD 5000 machine is only six months old. The hand-wheel does not work now . It just spins and the needle cannot move up and down. Also this has caused the bobbin ...

hand wheel end cover - use your fingernails if possible or possibly the corner of a credit card. Avoid hard edged metal for the same reason as before. Remove the screw in the centre of the hand wheel

...hand-wheel toward you, hold the needle thread (thread on the sewing machine needle) and tug it lightly as the needle goes down and then raises up. A small loop will raise up through the needle plate ...

...hand wheel? One of the belts could be worn. That could cause slipping and catching as it moves around the pulleys at the motor and the sewing mechanism. Similarly a belt could be too tight. You can ...