switch. Push in with a pen while holding your foot on the break and see if it flashes. Do this until the little light goes off. Mine was lit up. I tried it in park and it didn't work so I switched the
switch You may find broken wires inside the rubber wire cover between the door hinges.. the wires break due to flexing when the door opens and closes .. repair by soldering and heatshrinking the wires
break lights. If some of the brake light work and some do not, it cannot be a fuse. More lilely bulbs. If all the brake lights do not work then it could be fuse or brake light switch. You will have to
...new fules....30amp ..still no break lights...need help fast plz check your brake light switch under the dash. The little plunger is probably stuck in the switch. Or the switch may need to be
...go on a 2002 Dodge Durango go? How do I get to it so I can replace it?? if it is the break light switch that you are looking for it is high up on the break pedal and is connected with a small ...
...switch above the break pedal or see if it fell out of place Hello and Welcome to FixYa.com Sounds like the brake light switch located above the brake pedal is bad . Thank you for using FixYa.com ...
...MENT OR REPLACED ... I SAY THIS BECAUSE YOU SAY JUST TAIL LIGHTS AND NOT UR DASH LIGHTS AND FRONT BLINKERS ARE ON ALSO ALSO THATS WHY I THINK ITS YOUR BREAK SWITCH LOL LET ME KNOW IF THIS IS IT ...
my break lights are out on my 2005 dodge durango, the bulbs are good and I changed the stop light switch but steal no break lights check the fuses
break lights blubs good and break lights do not work? replace brakelight switch @ brake pedal.
...break light switch, This switch is located above the break pedal. When you step on the break it pushed down onto this switch. If the switch has fallen out of place or has gone bad you will need to ...
Usually answered in minutes!
2,049 Questions
1,616 Questions
1,378 Questions
886 Questions
1,005 Questions