Questions & Answers for: break switch

Ad

Question about 1995 Cutlass Supreme

1 Answer

...break switch under the dash connected to the break itself once you press the break the switch trips and the lights go on it sounds like that switch is gone you need to replace hope this helps you out ...

Ad

...break switch on a 1995 chevy van where is the break switch on a 1995 chevy van? having problems with the break lights. lights are off even when i press the breaks. it's on the break pedal where the ...

Ad

Question about 2004 XG350

1 Answer

...to the break switch may have backed out wiggle the wire and press in gentley get some one to check the breaks if this does not work the switch is most likely bad,,,,,also check your fuses GOOD ...

Question about 1994 Prizm

2 Answers

...switch and turn off the break lights....if the toggle switch goes out they wont work also have some one stand behind the car and wiggle the wires of the toggle switch see if it has a bad connection ...

Question about 2003 Tracker

2 Answers

break switch. It is located under the dash, intact with the break. When you push the break down, it triggers the switch, thus turning on your break lights. They are usually chrome looking and they are

Question about 2000 Jimmy

3 Answers

...break switch. The break switch is located by your break pedal itself. If you locate and replace the switch it should solve your problem. I hope this helps you out. also when replacing the break light ...

...break light switch which on my car is on the break tank. There should be 2 wires going to the switch. If you short them out and the lights work then replace break light switch.It might be the earth ...

Question about 2007 Durango Limited

1 Answer

...break light switch, This switch is located above the break pedal. When you step on the break it pushed down onto this switch. If the switch has fallen out of place or has gone bad you will need to ...

Question about 1991 Wrangler

2 Answers

...break fluid in it. hi see if there is a switch behind the brake peddle,undo one of the connectors,then switch ignition on and see if the brake lights have gone out,if so replace falty switch. good ...

...Switch is mounted on break pedal.pulling off the two connecting wires and touching together should activate break lights (ign on) if not its a fuse or break in wires.if it does light then switch is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...