Questions & Answers for: bobbin case

bobbin case and not a drop in bobbin. Let me know if you have a drop in bobbin: Setting bobbin case tension: Put wound bobbin in bobbin case. Thread it in case. Hold the thread and carefully let go of

...bobbin case tension adjustment: When the bobbin runs out, sometimes it bends the bobbin case tension spring. Then tension is too light. Take the bobbin case out of the machine. Tie the loose bobbin ...

bobbin case. The case has an empty bobbin snapped in. the lx 3125 has a front loading bobbin case which must be removed by pulling the latch on the bobbin case and thereby pulling the bobbin case from

...bobbin case or problem inserting bobbin case into the shuttle? Make sure the thread will feed from the bobbin clockwise and through the guide on the bobbin case. Lift the lever on the bobbin case to ...

bobbin case: Snap in the bobbin case latch, and put the bobbin into the bobbin case so that the bobbin runs clockwise. Passing the thread through the **** of the bobbin case, continue passing it under

bobbin case and the bobbin on the table in front of you. Have the open side of the bobbin case facing up and the bobbin with the thread of the bobbin unwinding clockwise. Drop the bobbin in the bobbin

...bobbin case for older Super Elna sewing machine Elna Star 62 Sewing Machine Parts / SewingPartsOnline.com https://www.sewingpartsonline.com > ... > Elna Parts > Star 62 (SU) $43.19 Bobbin Case Base, ...

...bobbin case in your sewing machine ? I have a Necchi 534FB sewing machine. We think the black part that holds the bobbin case in is not holding the bobbin case in the machine tight enough cause the ...

...bobbin case problems Sure, I can help you with your Bernina 800 bobbin case problems. What sort of issues are you having? If you are experiencing problems with your Bernina 800 bobbin case, here are ...

...bobbin case . It comes only half way out 880 Bernina If your bobbin and bobbin case are stuck on your 880 Bernina sewing machine, there could be several potential causes for this issue. Here are some ...