Questions & Answers for: GMC Sonoma ashtray panel

Question about 2002 Sonoma Extended Cab

1 Answer

2001 GMC Sierra C3 How to get front door panels off I am installing Dynamat and new speakers in my truck, got the panels off the rear doors without a problem but am finding it difficult to get the ...

Ad

Question about 1997 Sonoma

3 Answers

panel off under the drivers side and ashtray to access the relay.  If you turn on your hazards, you can hear or feel the relay working on and the turn signal relay is right be side it.  Good

Ad

Question about 1997 Sonoma

1 Answer

Cannot locate the flasher unit in a 1999 GMC sonoma truck that needs replaced. Front seating area, passenger side, behind dash, under access panel, mounted in fuse panel in glove compartment behind. ...

Question about 1997 Sonoma

1 Answer

Where is the fuze box for a 1997 gmc soloma truck 2 wheeldrive 4 cylinder? I cant find the fuxe box open the drivers door and look on the left dash panel (that meets the door) there should be a panel ...

Question about 1995 Sonoma

1 Answer

where is the flasher located there are most likely two, plugged into a fuse panel. there are most likely two fuse panels, a small one with a few large fuses under the hood and another larger panel ...

Question about 1999 Sonoma

1 Answer

POWER IS NOT GETTING TO FUEL PUMP Check your fuse panel inside your cab for blown fuel fuse and also check the fuse panel under the hood located near the battery.

Question about 1996 Sonoma

1 Answer

...ashtray. Then remove screws holding the plastic panel that is below the dashboard. You will see two round "can " shaped flasher units. The one on the right is for the signal lights. The one on the ...

need free dash wiring diagram for a 1991 sonoma with a digital instrument panel the plug that goes into the back of a regular sweep style instrument cluster is different than the wires that i9s ...

where is fuelpump relay on 1994 sonoma Behind the ashtray.

Question about 2002 Sonoma Extended Cab

1 Answer

instrument panel lights do no not work All gauges and iditots lights work but no panel light Obviously a connection issue. Check current to the light with a multimeter, check the fuses

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1999 GMC Sonoma
1999 GMC Sonoma

403 Questions

1996 GMC Sonoma
1996 GMC Sonoma

359 Questions

1995 GMC Sonoma
1995 GMC Sonoma

270 Questions

1998 GMC Sonoma
1998 GMC Sonoma

269 Questions

1997 GMC Sonoma
1997 GMC Sonoma

249 Questions

Manuals & User Guides

Loading...