Questions & Answers for: anti skating

...anti-skating problem Pulled my turntable out of storage (8 years+-) and now the ant-skating is pulling hard enough on the arm that clicking the cue sends the arm to mid record. I have turned down the ...

skating properly? if so, how do you fix that? Hi the pennies will mess up the stylus. There should be an anti skate setting at the back of the turn table, a round adjustable bit with numbers, increase

...on (new at-lp2D-usb turntable, just assembled). Increase the weight of the arm, check if it has anti-skate

Specs for Technic Sl1210M5G Turntable Hello, I am trying to set the anti - skate and tone arm hight on my turntables what are the proper specs, thanks. Anti skate should be set the same as the weight,

I need a tonearm replacing on an SL1210 MK5 turntable, the anti skate spring is busted I think? Need somewhere in Australia, preferably brisbane. The anti skate spring is not part of the arm assy but ...

...anti skating weight.it prevents the grooves on the record from pushing the stylus inward,wearing out one side.when the anti skate weight system has a fault,it drags the arm toward the center of the ...

...anti-skating, that usually means you're anti-skating spring needs attention. This often happens when replacing the tonearm or cables, but can happen for other reasons. Two things to try. First is an ...

how do i set the anti-skate on the stanton t62? Where is the anti-skate device on the stanton t62? There is no skate adjustment! The anti skate adjuster is located at the base of the tone arm. (if you

...anti-skating doesn't work properly On the early (pre 2017) versions, the anti-skate spring was too weak. To overcome this issue, you either need to cut off about a third of the existing spring or ...

anti skating what does this term mean Skating is when the stylus slides across the record's surface and doesn't stay in the grooves. This can happen when the stylus is too worn and so any control to ...