...shifter button ? the button poped out and is broken. I fixed mine at a junk yard. It's a simple wire C clip in the front of the handle and the whole thing slips right off. They sold me another handle ...
...handle off of the shifter. Remove anything in your cup holder and then you can snap off the shift console cover and get to the shift linkage beneath it. Spray lithium or silicone grease into all of ...
...backside of the shifter is a **** about 3/8 of a in long inside is a clip its shaped like a staple use a pick to pull out the clip and the handle will right off. then just pick one up at a junk ...
...shifter button t handle REPLACE SHIFT KNOB LOOK ALONG THE SIDE OF KNOB THERE IS A CLIP LOOL LIKE A STAPLE.PRY CLIP OUT THE GROOVE WITH A TINY SMALL FLAT HEAD SCREW DRIVER.AND SHIFT KNOB SHOULD COME ...
...handle If your asking how to do this... Well all i can say is that this takes serious work. To remove and replace it you have to replace the whole shifter assembly and i can only suggest you don't do ...
...shifter button sticks when cold, 35 degrees and below. Yes, I do put my foot on the brake. Works ok after car warms up. Dale Dale-there is a 'staple' that holds the shift handle onto the shaft, it is ...
...handle off and then push down on the white stick that is in center of shifter and see if it can move out of park then, also make sure your foot is on brake ! if that that does'nt work then there ...
Question about 2001 Intrigue
...is very loose there is a clip you pull out on the front just under the part you grip, you get that clip out the shifter handle will lift off, they sell universal handles at autozone and pep
Usually answered in minutes!
1,478 Questions
1,272 Questions
1,097 Questions
1,065 Questions
988 Questions