Re: Microwave Mod. # NN-H764BF SN: 6A44150194 Manufactured: April 2004 Problem: Was working one minute then al of a sudden 'NO Power', nothing in the digital display.

It sounds like there may be an issue with your Panasonic Dimension4 NN-C803 combination cooker. Here are a few things you can try to troubleshoot the issue:

1. Check the ventilation grills and filters to make sure that they are not blocked or dirty. A blocked ventilation system can cause the safety switch to trip.
2. Make sure that the cooker is not overloaded. If the oven or microwave are too full, it can cause the safety switch to trip.
3. Check the power cord and outlet to make sure that the cooker is getting the correct power supply.
4. Check the control panel for any error codes or messages that may indicate the cause of the issue.

Question edited for clarity.

RV Manual

https://www.scribd.com/document/467982373/Dolphin-Owners-Manual

and here is the Panasonic Microwave Manual

https://help.panasonic.ca/PCS/OperatingInstructions/NN-CD87KS_EN_USA_OM.pdf

..

I think your GE microwave is overdue for replacement.

Hi,

Here is a tip that will help you to figure out what is wrong with your Microwave Oven....

Basic Microwave Oven Troubleshooting Tips

heatman101

hi anyone can assist to solve my problem with my mircowave nn-c784mf which was lock , how to unlock it and able to use it again.

I am trying to do the same thing - plan to phone panasonic on monday when their on-line order shop opens. No. is 0844 844 3852

You can get the manual on the link below.

http://www2.panasonic.com/consumer-electronics/support/Home-Appliances/Microwave-Ovens/Over-the-Range-Microwaves/model.NN-S255WF

Good luck please rate 4 thumbs up and please leave a testimonial

Ensure that the clock is set and that is not in auto mode, the clock is only linked to the main oven and therefore it will not opearte if the clock is not set correctly, all the best

Try unplugging it or flipping the breaker to the oven. Leave the power off to it for a minute, then turn it back on.

Just turn off and then turn on next day...........