- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Possible that the processor has failed and you might be in for an expensive repair. It is possible that the main board needs to be replaced. Remove the card and check for loose joints or moisture in the circuit.Dry and refit the board, if not you might need to check for replacing the board
There are two safety switches that you may need to test. 1) Neutral safety switch- this switch is what tells the bike that it's in neutral and allows the starter to engage. 2) Kickstand safety switch- this switch will not allow the bike to run in gear if the kickstand is down. My initial guess is the neutral safety switch. If the neutral safety switch is bad, then you will not be able to start the bike with the kickstand down because the bike thinks that it's in gear (even if in neutral). This also may explain why the initial intermitent problem of not starting when warm since the metal contacts will expand and possibly not make contact when warmed up. Are you trying to start the bike with the kickstand up or down? If it were the kickstand safety switch, the bike would probably start okay and then die when you put it in gear.
Yes sounds like some kind of water leak. Take of the front plinth and check underneath the units and DW. I presume you DW is adjacent to the sink so please cheak all pipes including waste asap. Also opening the DW door whilst it is running can splash water, over a period of time this could effect wood material and cause your problem.
First try another gadget, a lamp or something on the wall plug, to see if the point is live. Then check your washer plug, could be that the fuse in the plug has blown, check out your washer wire....
Problems - Water will not drain out
how to add salt
×