Beneath the time on the clock. The word "mute"

We have this microwave in our caravan and its taken me about 20 holidays to figure this clock out. So I'm sorry i'm a bit late on this but its taken me until now to figure this out.

Step 1. Press the clock button.
Step 2. Press the cancel button. (the display will return to zero)
Step 3. Enter time using the 1 to 0 numbers.
Step 4. Press the clock button.

Seems so simple now I know how.

the timer control panel is getting bad.

From page 23 of Service Manual, --SE-- is a membrane keypad error.
Replace control panel.

"PF" on the display is an indication that your oven experienced a power interruption. Normally, the error code can be cleared by pressing the CLEAR/OFF button. You may have to reset the time. This is accomplished by pressing the CLOCK button, entering the time on the keypad, then pressing CLOCK again. If this does not clear your problem, please let me know. I hope this helps you.

I feel your pain, I am in the same position. After endless mucking around I finally figured it out. By the way, this is for my model P10034AP. Press these buttons: - Cancel [to abort anything currently underway] Clock [to set the time] Cancel [to clear the time allowing input] nnnn [the 4 numbers HH:MM in 24 hour time] Clock [to set the new time]
Hope that helps :) Cheers Jonathan Barton

Press the CLOCK button.
Then press the ^ (UP) and (DOWN) buttons to change the time.
After the correct time is selected,PRESS the CLOCK button again.

Sometimes the correct procedure for setting the clock is to press the CLOCK or TIME OF DAY button, then enter the time on the keyboard, then press the START button instead.

Otherwise, as long as you can enter a cooking time and your oven operates normally, then don't worry about it. On some models it is normal for the colon on the clock display to blink all the time.

Good luck.

on some machines you must enter the time before the unit will turn to on mode

youre welcome

Pressing "timer/clock" button 4 times turns on and off demo mode.