Change time - Citizen Eco-Drive Calibre 8700 Wrist Watch

Question edited for clarity and toss in some CAPS.

Military Time is 24 hour Time, 00:00 to 23:99! It sounds like actually want 12 hour time, 12 hours of A.M. and 12 hours of P.M.

You just ask :>D

Say "Change to 24-Hour clock" or use the Alexa app.

1. Open the Alexa app .
2. Select Devices .
3. Go to Echo & Alexa, or to All Devices.
4. Select your Echo Dot with clock device. This opens device settings.
5. Under General, select LED Display.
6. Turn 24-Hour Clock on or off.

Change the Time Format on Your Echo Dot with clock

..

To set time and date:
1) With time and date showing,
press SET and hold for 2 seconds.
2) Seconds flash. Press START/STOP to set seconds
to zero.
3) Press MODE
.
Hour flashes.
Press START/STOP
to change hour, including AM (no symbol) and PM.
4) Press MODE
.
Minutes flash.
Press START/STOP to change
minutes; hold button to scan values.
5) Press MODE. Year flashes.
Press START/STOP to change year.
6) Press MODE
.
Month flashes.
Press START/STOP
to change month.
7) Press MODE
.
Date flashes.
Press START/STOP
to change date.
8) Press SET
, at any step, to exit and save settings.
With time and date showing, press SET
to switch between 12- or 24- hour time format.
Date (day of month) appears in upper part of display in Time
mode. Press and hold START/STOP
to see month, date, and year in large digits

Or go to:
http://assets.timex.com/user_guides/Marathon/W292-Marathon-AllLanguages.pdf

probably because you have it set to 12 pm midnight and not 12 noon so at 12 noon it is actually midnight when the date will change
reset the time of the day to am or pm and any pm settings will change the date at 12 midnight.

Advance the time by 23 hours. And reset the day to the correct one. make sure that the date change occurs at midnight your time and not at noon.

Press and hold "MODE". Press MODE 2 times (after the first time, the alarm time flashes, after the 2nd time, the second flashes). Press ADJ to change seconds. Press ST/STP to switch from seconds to minute. Press ADJ to change minutes. Then press ADJ to change hours. Press MODE when done.

Hi jessestaton,

All you would have to do is change the time from either the digital mode or the anolog hands , you can choose one which is incorrect and try to change it.

Now to change the analog clock's settings , you would have a button which you can manually rotate and set the time, this is how you would be able to recognise that it's for the anolog time modification.

If you need to change the digital time , all you have to do is find out buttons that are present on the watch , and then try to change the time.

Note:- If you find a circled knob , remember that could only be for anolog time change as digital time is never changed using such knobs or screws , but have seperate button for that function.

In case you have any queries, feel free to get back.

Hope this helps ..:)

You change the date the same way you change the time. The only difference being pull the crown out 1/2 way to the first click instead of all the way out.

Hello,
i already found one link with all Fossil manuals.
Thank´s for your support.

I need to change the current time. It does not change with daylight savings time, and I always have a problem setting it. Can you help me?