I have a scanner trying to program got codes dont know how to put them in

If you already have your codes, go to first channel hit Program, then insert Frequency and hit enter. At least that's how its done on my Pro 97 and all the other scanners Ive owned in the past. Try downloading your manual if you don't have one. Its easy and its free. It will tell you everything you need to know about your product. Good luck.

Since you didn't specify the model of your Uniden Bearcat, I can only suggest you select it from the list beginning here to download a copy of the manual.

Programming the BC248CLT is fairly simple, and detailed instructions can be found in the factory manual that you can download and print here:

http://www.uniden.com/pdf/BC248CLTom.pdf

What you can program and what you can hear will depend on your location. Many communities now use trunking systems and digital (APCO-25) systems, and your scanner is not compatible with either. For a comprehensive database of active frequencies and systems in your area, visit:

www.RadioReference.com

Bill B

Just program 0.0 (zero point zero) into a channel to clear the existing frequency. Also, programming a new frequency into a channel will overwrite/delete the previously programmed freq.

Bill B

To enter a known frequency (they're not codes) into your scanner:
- Power the unit ON
- Press the MANUAL key
- Enter a channel number (01 - 30)
- Press MANUAL
- Enter the frequency, including decimal point (e.g., 438.065)
- Press E

More detailed programming is outlined in the scanner operating instructions, which you can download and print here:

http://www.uniden.com/pdf/BC60XLT-1om.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:

www.RadioReference.com

Bill B

You didn't specify a problem, but you can download the manual for your scanner here:

http://uniden.com/pdf/BC248CLTom.pdf

It will walk you through the programming process.

For a comprehensive database of active frequencies in your area, visit

www.RadioReference.com

it's allready programed for u

when on the scanning part push the scan part again and push the prog buton that is under the lower arrow key and push it again so it will go to a different (blank channel) . you will know when it you are able to prog when the word prog will be on the bottom of the screen then go to cityfreq.com to find the codes for your area and put them in and then press enter. after you do that press the prog button again and it will move to the next number to program a different on when you get the desired amount of frequencies in your scanner just push scan and it will run through the entered codes.. Or if thats not the problem then on top should be a bank of numbers and andd you have to push the number of what bank you want it to run through at that time.

your scanner has an attenuater.it lets you program your scanner to reduce scanners sensitivity .check to see if its on or off.

i am having trouble programing frequencies into my scanner i need help!!!!!!!!!!!!!!!!!!!