My wife insists on screwing with our Honeywell UtilityPro Series thermostat and this time I suspect that she has changed something in the ADVANCED FUNCTIONS settings. Not the ADVANCED FUNCTIONS menu resulting from touching SYSTEM>then holding the BLANK_MIDDLE_KEY (4th from left), but instead, the menu resulting from touching SYSTEM>then holding the BLANK_6th_KEY (the menu that is activated by holding the 6th blank button, counting across the bottom from the right). By touching SYSTEM and then holding this 6th button (blank), parameters 51 through 74 display their various values. The thermostat model number is Honeywell UtilityPro T2060F. Can someone assist in verifying the proper values for these 51-74 parameters. I have a standard single heatpump system with electric-strip backup? Thanks in advance.
Re: My wife insists on screwing with our Honeywell...
Not trying to be a smart alec or anything like that but have you ever considerd in a thermostst with a lock-out key pad. We use them at the day cares and have no problems with the stats anymore.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Honeywell T6575D1009 - Digital Fan Coil Thermostat; 4 pipe Auto Heat/Cool changeover, 3 speed fan with On-Auto Fan switch - Overview T6570 Series Digital ...
Honeywell T6575D1009 Thermostat. This item has been replaced by TB6575A1000, which is a functional replacement. See the suggested products field for a ...
You need to remove the thermostat from the wall plate to change the battery. Look on the bottom of the thermostat for a locking screw. Loosen this screw with an appropriate screw driver. Then pull the bottom of the thermostat away from the wall plate and then lift up from the bottom. When you put the thermostat back on, line up the brackets at the top of the thermostat with the slots on the wall plate. Then push the thermostat against the wall plate and tighten the locking screw.
The documentation for the Honeywell RTH2300B1012/U is available on the product page: https://www.honeywellstore.com/store/products/5-2-day-programmable-thermostat-honeywell-rth2300b.htm . Click on the Manuals tab. See page 4 (page 6 of the PDF) for removing the thermostat from the wall plate. See page 9 (11 of the PDF) for replacing the batteries and putting the thermostat back on the wall plate. The current link to the manual is https://www.honeywellstore.com/store/images/pdf/rth2300b1012-u-5-2-day-programmable-thermostat.pdf .
Hi,
Press the "system" button
Then press and hold the center blank button till the advanced functions menu comes up...
Then set the year, month, and date and the day will be correct
Go to honeywell.com
Under red welcome sign
Bottom red highlighted box literature/image search
Type in thermostat model number
Click on arrow to right
Then click on the PDF files owners manual / installation instructions
If you can’t find what you want, the bottom left and bottom of web
Page, they have homeowners assistance and Home products to get the help you need.
Maple chase is the same I believe.Sounds like the thermostat is bad.I personally think the Honeywell 3000-4000 series thermostat are better.But the Maple should work!
http://www.ntsupply.com/files/products/VP8000TechData.pdf
check out this website
if this is the touch screen tstat you have to enter installer setup
touch the SYSTEM button once
hold down what is usually the HOLD and SCREEN keys touch both keys at the same time
(hold the two blank keys on either side of the center key at the bottom)
this will bring you into the setup
BE VERY CAREFUL WHAT YOU CHANGE THIS COULD EASILY SCREW UP YOUR SETTINGS
change where the numboer is 0120 to 0280 and change 1 to 0 then hit done this should fix it:)
After posting that I was having the same problem, I found a solution.
I used these instructions http://www.hydro-temp.com/help/drawings/honeywell%2069-1894ES.pdf and followed the Installer Setup on pages 6 through 10. Basically you just need to enter the setup mode following the instructions, scroll to setting# 280 and change the setting from "1" to "0" then the backlight will turn off after 8 seconds. Don't change any other settings if you don't know what you are doing.
×