I cant pair my jabra bluetooth to my evo! - Jabra Stone Bluetooth Headset

forget the headset
turn bluetooth off
turn the headset device off
reboot phone.
try again

Hi leovy_naguit,

I see that you need information regarding your Jabra Bluetooth Headset.

*Once the Light on the Headset is constantly lit it means that it is ready for pairing.
*On you Mobile phone go to Bluetooth it should be detected as soon as you set your mobile phone's BT to be discoverable.
*Select Connect/Accept/OK or which ever options you Mobile Phone will provide when pairing with your headset.
*The pairing code will be " 0000 "

This should help you pair up your headset with any Mobile phone or device that uses Bluetooth.

I hope that this will be of help.

Have a nice day,

mvincentc

Make sure you have your bluetooth device in pairing mode to do this you usually hold the power button down while turning on the blue tooth device,then there should be a light that stays on ,now that u are in pairing mode you need to enter a pairing code most bluetooth manufacturers use a 4 digit pin pairing code they are as follows 0000,1234,9999,or 1111, i hope this helps.

By putting the blue tooth device in discovery mode it will reset it then your will have to enter the manufactures factory pin pairing code,Most blue tooth manufactures use a 4 digit pin pairing code,they are as follows0000,1234,1111,or 9999 this should be the code you are looking for i hope this helps

Jabra provide a pairing guide for a number of devices.
Support - Pairing Guide - Jabra

Your use of 0000 is correct, perhaps the specific details will help.

why will it not pair with my evo phone

http://img1.jabra.com/sites/Jabra/GNimages/Products/WirelessHeadset/BT8040/Documents/UM/BT8040_UM_EM_EN_1409.pdf

Here you go

default PIN is 0000... be sure to turn on BT on your phone first, then power on your jabra... your phone should ask to pair to the jabra and then you enter the 0000

hold down the button till the light turns solid blue, then let the phone already in bluetooth mode find the jabra, it will ask for a password, enter 0000

This is one of the mistake commonly done by many people. First you need to pair. Let me walk you through. First, the headset has to be switched to pairing mode which is done by holding the on button for a while even after the headset is switched on. Then the bluetooth headset light will remain on. You switch on the phone bluetooth, search new device. Then select it and press the option for pairing. Read the instructions which come on the phone display and select accordingly. It will ask for passcode which is usually four zeros. Then it will get paired ask you whether to connect. You select connect and you are done.