Model #MDBTT792CG serial #16473992CG I am getting

that's not an error code. it's a 1H, as in one hour, the delayed start function. hold the delay start button down to override, then reset it back to where you want it.

Hello,

Try unplugging the unit for several minutes if that does not fix the issue you will need to replace the main control board to fix the issue, let me know,

http://www.appliancerepairlesson.com/

reboot.

hi heres what i found The 1 H is not a fault code it is the delay time of one hour.

The 1 H is not a fault code it is the delay time of one hour.

I think that the delayed use is engaged.  Wait an hour, and it will probably start up on its own.

you have set it to start after a one hour delay- just press the start delay button until it cycles through past 24h and you will get back to the immediate start mode...

Peace Friend,
ngafm At your service!

You said,you have a Maytag Dishwasher MDB6601AWW. It went through a normal wash and you loaded it and it now will not start. It flashes 1H, 2H, up to 9H. It has flashed 81.

With an error code the only way to find and to repair this is,
First unplug the washer and wait a few minutes then restart it like rebooting your computer when its acting strange!
If it corrects the problem, GREAT!


If not only a trained laundry tech can make the electronic diagnoses.
Like we used to be able to fix my own cars, but not today they need diagnostic equipment!


How old is the washer?

If the appliance is 10 years old or more you it may not be advisable to put good money into bad!
New appliances are so much more efficient today that they can save you a lot of money in energy!!!!
Water,Electric and detergent! And put money back in your pocket!
The new appliance will pay for itself in only a few years!


You will be fine
Bless You ngafm
PLEASE GIVE ME A GOOD RATING HERE AT FIXYA.COM BEFORE YOU SIGN OFF.

The 1 H is not a fault code it is the delay time of one hour.

have you tryed to unplug the dishwasher?