I need to troubleshoot a cd laser assembly tracking system. My player usually plays cds ok but sometimes it will show 'no disc'. Other times it will play a track but will then make a clicking noise and stop playing. This has happened with multiple discs, so the laser reader is okay. When I remove the disc sometimes the laser assembly is half way in the track, instead of being on the inside track. It's a cheap no-name unit, but I'd like to repair it if it's easy to do.

Philip Rowney

• 94 Answers
• Posted on May 04, 2007

SOURCE: cd will not play and keeps ejecting

source http://www.kenwood.nl/support/veelgestelde_vragen/ Changer Error Codes ? E-00: Poor Cable connection. ? E-01: Magazine not properly set in changer. ? E-02: No Disc in magazine. ? E-03: CD does not have selected track number. ? E-04: Disc is dirty, upside down or unreadable. ? E-10: No data is recorded on the MD. The player plays the next disc automatically. ? E-99: Changer malfunction, disc may be caught in machine or changer requires service. Sounds like the mech is gummed up, jammed, or a cd is stuck inside. Get a nerd to open it up and check it over. Luck

JVCKENWOOD Nederland Veelgestelde vragen

kenwood.nl

Web site of JVCKENWOOD Nederland...

SOURCE: E-99 and other times time TOC ERROR shows up.

hi TOC error sounds like its the laser is faulty. you could try a cd cleaning disc. this may cure the problem..


Regards

Mark
www.blueice-electronics.co.uk

SOURCE: Kenwood KDC-2025 won't play CDs

hey it does not play mp3 discs. u need a regular disc. mathews

SOURCE: Kenwood head unit CD and AUX sound not working

I fixed the sound problem with tech support from Kenwood. I had the blue wire from the Kenwood which is the antennae turn on wired to the amp turn on for the vehicle (2001 Blazer with Bose factory stereo). This is how I was told to wire it from the installation tech where I purchased the wiring harness. The tuning played fine because the Bose amp turned on when I played the tuner but when I played the cd or aux the amp turned off, thus no sound. The kenwood tech toldd me to wire the blue/white wire to the amp turn on for the vehicle so the amp would be on when ever power to the Kenwood was on. I rewired this way and everything works great now.

SOURCE: Kenwood KDC-119 car stereo problem

sometimes, if you unplug the main radio harness out from the back of the radio-leave it unplugged for about a minute you can reset the electronics that are now locked up- after you plug the harness back in you shoud hear the cd mechanism moving- now press the eject button- if there is no mechanical problem the cd will eject. If it won't you can email me at [email protected] or call me at (908)756-3544 if this helps you please give me a good rating