How do I move the time and date stamp? - Sony Dvcam DSR-390P DV Digital Camcorder

If you do not want the date and time stamp on future pictures, turn it off:

1. Press the Menu button.
2. Use the arrows to:
   1. Select the Setup menu.
   2. Select the Date/Time Stamp feature.
   3. Turn off the Date/Time Stamp feature.
3. When you are finished, press the OK button.

If you do not want the date and time stamp on future pictures, turn it off:

1. Press the Menu button.
2. Use the arrows to:
   1. Select the Setup menu.
   2. Select the Date/Time Stamp feature.
   3. Turn off the Date/Time Stamp feature.
3. When you are finished, press the OK button.

Download any manual about this product by visiting the link bellow. hope it what you looking for.

http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a710_is#BrochuresAndManuals

Thanks for using fixya,

Hello and Welcome to FixYa!

To set the date and time stamp on pictures, Follow the given instructions:
Setting Date and Time:

First of all set the exact and time if your camera:

• Press the "Menu" button on the camera and use the right navigation button to choose the "Set Up" menu.
• Scroll down to "Date/Time" and press the ""Func./Set" button. The set date and time will appear on the screen, and the month unit will flash.
• Adjust the month unit by pressing the up or down navigation buttons. Move to the day unit by pressing the right navigation button. Use the same instructions to adjust each unit of the date and time.Push the "Func./Set" button to save the time and date settings.

Setting Date Stamp on pictures:

• Press the "Func./Set" button and select "Recording Pixels" and "Postcard". The camera is now set to "Postcard" mode.
• Open the "Rec." menu by pressing the "Menu" button on the back of the camera.
• Highlight "Date Stamp" by pressing the down navigation button.
• Change the "Date Stamp" setting by pressing the right or left navigation button. Your choices are "Off", "Date" or "Date/Time". Now, when you take photographs the date or the date and time will appear on the picture.

If this solution helps you then your token of appreciation in the form of Rating as Four Thumbs and a testimonial will be esteemed.
Thanks you for using FixYa!

Hello Dear,

In all Canon PowerShot and IXUS series cameras date and time can be stamped on the photos shot in Post Card Size, to set the Camera into this mode do the following:
On Camera in Shooting mode (Live view is visible on LCD)
Press Function/Set button once
From right-left move to the Post Card Size
Press Function/Set again.
Now, Press Menu Button
From up-down move down
On Stamp Date (Option Name written, Visible on the Right top Corner of Screen)
From right-left move and select you want only Date or Date and Time both.
Press Menu again
Now, you are ready.

For more clarification please revert.

Warm Regards,
Joseph Manoj

Follow these steps:

1. Press the Menu button.
2. Select the Setup menu.
3. Select the Date/Time Stamp feature.
4. Turn off the Date/Time Stamp feature.
5. Press the OK button.

If you find my solution helpful, you're kindly requested to rate it. Thanks!

Move top selector all the way to right,

1.put in auto mode
2. Hit Function set button
3. Where it lets use choose sizefrom L, M1, M2...scroll to Post Card 1600x 1200
4. hit function set again
5. Hit Menu, now you can select time date stamp
6. took me awhile to figure it out

The date/time cannot be deleted once it is embedded in the image. To turn off the date/time deselect the date/time stamping by following procedure:
These instructions explain how to insert the date in images.
attention:

• The [Date Stamp] cannot be deleted from the image data once it has been recorded because the date is written in as an image.
• When selecting [Date Stamp] , [Recording Pixels] is set to 1600 x 1200 pixels and the compression (image quality) to [Fine].
• When the shooting mode is set to <Movie> (), settings for inserting the date and time cannot be made.
• The following explanations are provided based on the assumption that the [Shooting Mode] is set to <Program AE> ().

1. Press the <Power> button on the camera.

2. Press the <FUNC./SET> () button.

3. A screen like the one below will appear on the monitor.

Select [Date Stamp] () in the [Recording Pixels] section .
Press the <MENU> () button.


4. A screen like the one below will appear on the monitor.

Operate the <directional buttons> left or right to select [Date Stamp] and set it to [Date] or [Date & Time].
Press the <MENU> () button.


5. Press the <FUNC./SET> () button.

6. Make sure that the [Date Stamp] is set and the following screen will appear with the icon () in the lower-left corner of the screen.

7. When shooting with this setting, the date will be embedded in the image as shown below.

[Date]
[Date & Time]
warning: The date, its font and color, and the position where it is displayed cannot be changed. Also, dates and times recorded with [Date Stamp] cannot be deleted.


If you need a manual for the A480, you can download it from:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=320&modelid=18155

Please rate this solution. Thanks.

I have the same camera and the only way to do this is to first, Make sure you have set the date and time correctly on your camera. Take a picture or, view picture you want date & time stamped. Press the circular 'Menu/Set' button. Press down arrow to playback mode. Press right arrow on 'text stamp'. Choose whether to apply stamp to single or multiple photos. Press 'Menu/set' to select photo to stamp. Choose which stamps to add. Date, time, age etc.. Press 'Menu/set' again and select 'Yes' in box. The only problem with this is that it will resize your photos to 3m, which can make them grainier if you took them at a higher res. Gillian