How to remove water from inside the wrist watch

You can take your watch to your local Walmart and find a matching band and using the little like eye glass screw driver and remove the pins with out bending them and put a new band on

Get it dried out as soon as possible as rust starts in as little as 48 hours. Then find out why it leaked. You will need a watchmaker

mcdevito75 here, In most cases the glass (crystal) come off or out thru the back of the watch which means you"ll have to remove the quartz mechanism, and that means removeing the stem, thse quartz stems are very prone to breaking while being removed form the quatrz mechanism and the cost of a repair may be more expensive then a whole new watch, shop around get a price from a small watch repair shop on repair verses a new Fossil watch.

u can go for a new glass from the nearest watch shop.if u ont get it then u can go for another choice.

The tiny particles of broken glass can stop the watch working. There isn't anythining you can do about it. The only solution is to find your nearest watch repair shop and ask for help as they definetely have all the gear and knowledge to sort it out.

Rate, please.

go to an autherised survice center and they can do it.

If you are shure that your watch has a removable caseback then you have to use special case opening tool (looks like knife with very short and curved blade). Insert blade into the groove and applying great and steady pressure turn the opener upwards. The back should come off. Make sure the blade doesn't slip, oterwise you will damage the movement.
As your watch model is obsolete, I compared it to MQ24-7BLL and find that this movement should be opened from the front- First the glass must be removed, then stem with crown and then movement itself. In this case you will not be able to do it yourself as special tool for removing glass is needed. If you will try it anyway, you will end up with snapped glass as it is set with great pressure to make case water resistant.

Regards

Arthur

Find the decent watchmaker near you and ask for the new glass as mineral and sapphire glasses are not possible to polish due to the exeptional hardness.
Watch will instantly look much better and water resistance will not be affected.

The film is moisture, you may have to remove the back and let if evaporate. You need new seals as it is your sweat that is causing it.