I have a euro-pro shark model 9110 . I was sewing fine then the needle acted like it got jammed, so I turned the machine off and rethreaded the bobbin. Now the upper thread just dips down into the bobbin, but it doesn't catch the thread at all.
In order to see whether or not my euro-pro 9110 had a timing issue, the service rep had me change out the needle (making sure I was using anything but a Singer brand needle--they do not work in these machines). I re-threaded the needle, took out the bobbin casing and the plastic ring encasing the bobbin, then lowered the needle to see if the hook on the metal ring holding the bobbin actually catches the thread on its own. If it doesn't catch, it's a timing issue and needs repair. They can walk you through this process of troubleshooting and set up repair if need. Call Eruo-Pro's customer service center for sewing machine service and repair at 800-798-7395
1,151 views
Usually answered in minutes!
On my Euro-Pro Model 9110 the thread gets bunched up in the bobbin case. The needle has hit the bobbin case and damaged it. It is at a repair
shop, but they can't seem to find where to get the correct bobbin case for this machine.
×