My panasonic kx-tga431al has all of a sudden changed the dial tone. instead of the regular tone, it now has a tone that sounds like a busy signal... what do i do to fix this?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you have a Panasonic KX-T7736 phone with one line not producing dial tone, there are a few possible causes. The first possibility is that the phone line itself is the problem.
If you have another phone in the house, try plugging it into the same phone line and see if you get a dial tone. If you do, then the problem is with the KX-T7736 and not the phone line.
The second possibility is that the problem is with the phone's internal wiring. To check this, unplug the phone from the wall jack and plug it into a different jack. If you get a dial tone, then the problem is with the first jack and not the phone.
The third possibility is that the problem is with the phone itself. If you've tried the other two solutions and you still don't have a dial tone, then the problem is most likely with the KX-T7736 and you'll need to contact Panasonic for assistance.
I hope this helps!
If that pulsating tone is anything like what I sometimes here on my phone, then it has nothing to do with your phone. It's your telephone company telling you that there's unheard voicemail on their system. You'll need to contact your telephone service provider for instructions on how to access their voicemail system.
the reception on these phones aren't what they seem to be all about it sounds like it could be your antenna they cause alot of problems or it could the phone jack it self
I have a similar Panasonic phone (KX_TGA101S). Someone must have inadvertently changed the dial mode on you. Here is how you change it on mine, which should be similar to yours. Hit the Menu button. Scroll down to "Set tel line" and hit the Menu Button (OK). If it isn't displayed, scroll to "Set Dial Mode" and hit the Menu Button. Select Tone instead of Pulse and hit the Menu Button. That should do it.
Make sure the phone is pluggd into the wall properly. If so and no dial tone is detectable make sure you installed the batterys on the handsets correctly and that they are fully charged. If you have a friendly neighbor with a working phone line plug youre phone into their line and if it does not work and you followed my previous instructions seek a repair center in youre area that honors panasonic warranties. If the phone is pluggd in at the neighbors house and it works use it to call the phone company.
×