Symphonic television has no sound

You are going to find at most a Universal may turn it off/on and do volume but will be missing a lot of key functions

If you lost the remote Google the internet for an exact one or if the old one does not work see i f someone can repair it---most are easy to fix.

let me know if you have questions

Hi
Setup code for Symphonic TV/DVD combo with One for all URC-3300 universa remote control is;
0000
An other code to check is: [ 0456 ]
OK.

There should be a tiny hole near the DVD tray.
Uncurl a paper clip, and shove it into the hole.
The tray should unlock and open slightly allowing you to grab it and open it fully.
Good luck!

In the front of the Tray of the DVD is a small hole using a paper clip or similar piece of straight stiff wire, insert it into the hole, push in until you hear/feel a click, keep pushing gently and the tray will pop open.

d tv

hello it sounds like theres a dead short unless you have a multimeter and oscilloscope a diagram and a bit of know how then yes you could do it youself i'd would get a quote for a repair good luck

shaun

replace speaker.

Hmmm, really hard to say without looking at it whether it's worth the repair or not. Do you have cable or satelite connected to it? IF you are just recieving signal "off air" in about a year it will not work by itself any more. The nation is going digital. IF it is connected to cable or satelite it will probably still work fine as long as you have an analog converter box of either kind. OR if the basic cable is analog and not switching to digital. (ask your cable company) That should help you determine whether to replace or repair. As for the sound issue it is my guess that it will probably be more complex than simple. Costing $55-$125 to fix. At that rate you can buy another as easily. MY only suggestion is buy a tv that has digital capabilities so regardless you are covered! The small TV's are still pretty cheap even with the new technologies.

Try the remote's "search" feature. If that does not work, then the remote doesn't have a code for that unit.

Hope that fixed ya...

Geno

You gotta change the vcr motor charge belt.Its all the problem good luck.