Hi, I have a JBL subwoofer modeled PSW-D110 and the fuse is blown. if I replace the fuse, it hums. There are several components seem blown. One of the cap is blown, can't read the value of the cap(C24). Does anyone know the value of the cap. Does anyone have the schematic for this sub? please send it to me if you have it. I read it on the forum that it could be the s53ami causing this problem. Can some confirm this, because I don't want to spend the money to buy the part if this is not the problem. Your help will be greatly appreciated. Thanks. please also send me the schematic for the s531mi component if you have it. My JBL PSW-D110 started humming loud... The fuse is fine and the power LED displays is illuminated in green. However the sound is unbearable... It would like to replace the entire IC panel if its most cost effective. I contacted JBL online and they have no authorized service center in my area. Based on the description below does anyone have any idea where to start as I don't have the schematic? Any help would be appreciated. Thanks. MARK
Here is the manual, I am looking for a more detailed version
you can order a schematic from here
I will try to find a free one, but there may not be one, the manual link is only page one
jaime, I just found that manual too! oh well
×
Hello there...
Here is the link to the service mannual
http://manuals.harman.com/JBL/HOM/Service%20Manual/PSW-D112-DPS-12%20sm.pdf
I request you to replace the components blown around the black out area if u can purchase them for cheap rates in your area.
All the Best
The value of C24 is 330nf 100V 20% mono-ceramic axial.
Thankyou
×
I would just buy a new sub.
Good luck.
Dear,
I believe the C24 Value is 100 nF 50v .
Here is the value of C24 >>> 330nf 100V 80/-20% mono-ceramic axial.
Here is the service manual.
I would suggest that before you start changing any other part, change or check C1 and C2 for dry or leaky conditions.
Good Luck.
Here is more info on the same subject.
×
SOURCE: JBL sub PSW-D110 hums, and the fuse is blown
Try replacing parts listed below first. Less that $10.00 C6 kit as an substitute and the parts are as follows: The part is available The part is called: CAP RAD 10uF 100V Bi Polar. BU120/BU80 The Part # is: UVP2A100MPD The price is $2.70 each, plus shipping and handling (For U.S. orders only). The part is called: RES CF 20K OHM 1/2W For C6 kit The Part # is: 293-20K The price is $1.98 each, plus shipping and handling (For U.S. orders only). The part is called: RES mf 47R OHM 1/4W For C6 kit USE -RC The Part # is: 271-47 The price is $1.98 each, plus shipping and handling (For U.S. orders only). The part is called: CAP MCER AX 100NF 50V For C6 kit The Part # is: 75-1C10X7R104K050B The price is $1.90 each, plus shipping and handling (For U.S. orders only). The part is called: Instructions, Kit (C6 repair) Gen brand The Part # is: C6KIT INST The price is $2.01 each, plus shipping and handling (For U.S. orders only). If you are not in the U.S. please advise where you are so the correct information can be sent to you. Please add tax if you live in New York (8.25%), New Jersey (7%), Connecticut (6%), California (8.25%), Florida (6%), Arizona (8.10%), North Carolina (7%) & Georgia (7%). You can order this item by calling us at 800-422-8027, 800-336-4525 and 800-553-3332 Please allow 7-10 business days for shipping
C6 kit as an substitute and the parts are as follows:
The part is available
The part is called: CAP RAD 10uF 100V Bi Polar. BU120/BU80
The Part # is: UVP2A100MPD
The price is $2.70 each, plus shipping and handling (For U.S. orders only).
The part is called: RES CF 20K OHM 1/2W For C6 kit
The Part # is: 293-20K
The price is $1.98 each, plus shipping and handling (For U.S. orders only).
The part is called: RES mf 47R OHM 1/4W For C6 kit USE -RC
The Part # is: 271-47
The price is $1.98 each, plus shipping and handling (For U.S. orders only).
The part is called: CAP MCER AX 100NF 50V For C6 kit
The Part # is: 75-1C10X7R104K050B
The price is $1.90 each, plus shipping and handling (For U.S. orders only).
The part is called: Instructions, Kit (C6 repair) Gen brand
The Part # is: C6KIT INST
The price is $2.01 each, plus shipping and handling (For U.S. orders only).
If you are not in the U.S. please advise where you are so the correct information can be sent to you.
Please add tax if you live in New York (8.25%), New Jersey (7%), Connecticut (6%), California (8.25%), Florida (6%), Arizona (8.10%), North Carolina (7%) & Georgia (7%).
You can order this item by calling us at 800-422-8027, 800-336-4525 and 800-553-3332
Please allow 7-10 business days for shipping
1,298 views
Usually answered in minutes!
×