I have QuickCam Fusion 9.0.1 i have disc but the

go to link
choose windows 7 and 32 or 64
and download

Webcam software is notorious for remaining hooked up on old programs it was used in - even if you have exited the program correctly. You have to reboot the software by unplugging the camera for a few seconds from the USB
If you want further advice visit the Logitech website - Identify your camera and click on it to navigate to the support page for your model

http://www.microsoft.com/hardware/download/download.aspx?category=ICE&type=LifeCam&sku=68A-00001

Try and re-install the Quickcam software. If that doesn't work goto http://www.logitech.com/index.cfm/435/278&hub=1&cl=us,en and download the latest drivers.

sotware for cameras dont work for apple unless in UVC mode means plug and play. here is a list of cameras compatiable to apple computers.

amera Name P/N QuickCam E3500/E3560 860-000095 QuickCam Ultra Vision SE 860-000023 QuickCam Ultra Vision 861238 QuickCam Orbit/Sphere MP 861305 QuickCam Fusion 861304 QuickCam Pro 5000 861306 QuickCam Pro 9000 861464 QuickCam Pro for Notebooks 860-000026 QuickCam for Notebooks Pro 861303 QuickCam Communicate MP (S5500) 860-000106 QuickCam Communicate Deluxe (S7500) 860-000107 QuickCam Communicate Deluxe 861235 QuickCam Deluxe for Notebooks 860-000009 QuickCam Vision Pro for Mac 860-000143
QuickCam Orbit AF 860-000063

Usually Logitech cameras is automatically detected by Windows, when you plug it in via USB!!!

First check the camera and see if the button on the camera is stuck in the on position from the fall.
If no, do this,
Normal 0 Go to "TOOLS", click on "OPTIONS," Then go to "Audio Settings" and click on it. Make sure both the Microphone and Speaker's are correctly chosen. Then "make a free test call." Wait till the voice tells you to record. Then when finished talking wait for the test persons voice to insure your audio transmission is working. Then go back to options and test your video settings. Click on Video Settings and proceed to set up you video camera. Also, you can visit this site for additional information to setup video.
http://www.skype.com/help/guides/video/
Hope this helps. Bud

Please click on the link mentioned below to download the drivers:

Windows Vista Multilingual 32-bit

* Title: QuickCam v11.1.0.2030
* Software Version: 11.1.0.2030
* Post Date: 8/7/2007
* Platform: Windows Vista
* File Size: Approximate download size is 30.7 megabytes.

http://www.logitech.com/pub/techsupport/quickcam/qc1110.exe

Windows Vista Multilingual 64-bit

* Title: QuickCam v11.1.0.2030
* Software Version: 11.1.0.2030
* Post Date: 8/7/2007
* Platform: Windows Vista
* File Size: Approximate download size is 36.3 megabytes.

http://www.logitech.com/pub/techsupport/quickcam/qc1110_x64.exe

Also visit this website for other Windows driver:

http://drivers.softpedia.com/get/SCANNER-Digital-CAMERA-WEBCAM/LOGITECH/Logitech-QuickCam-Pro-4000.shtml

Thanks

The quickcam software is about 5-7mb, the fusion is about 11-15mb.

Fusion for Vista supports 30 frames per second (4X faster than a quick cam)

goto this link and download upgrades etc, choose the OS etc.

What kind of chat are you using?

EVERYONE:

There are two different QuickCam Fusions. The older one, like mine, is not UVC compatable, while the new one is. For this reason, the new QuickCam Fusion will work on Mac while the old one will not.

It is semi-pleasing to know that a developer is supposedly working on the old quickcam fusion support in Macam, but I'm not sure how long that will take.

Solution: Wait for that developer.