Anybody please help me!!! when I take picture my cam keep saying ''CARD LOCKED''.. how to fix this problem??? Please...

I think the USB card is locked. You can slide the card out and flip the little notch up then replace and try.

WILL NEED TO SEND IT IN FOR REPAIRS

Take the card out and look on the edge for a little slide switch. It should say locked and unlocked.

• connect it to the computer
• look weather threis any hidden or zipped file or folder
• if any unzip it or unhidden it

YOU NEED TO CONTACT CASIO SUPPORT TO SEE IF THEY CAN FIX IT OR IF ITS WORTH FIXING NOT MUCH YOU CAN DO ON YOUR OWN CHANCES ARE IS THAT ITS SOMETHING TO DO WITH THE ELECTRONICS INSIDE MAY HAVE BEEN BROKE OR CAME LOOSE WHEN YOU DROPPED IT

thank you very much, it was the card when i removed the card it worked. again thank you

hello, check your card for a clip and see if its in lock position. set it to unlock.
also check if your card is compatible for you cam.

Hi there, My name is Rob and I can help you. Do this:

Make sure the camera is off and pull out the SD card. Look on the side of the card. You will see a little switch. One side says locked (or shows a little picture of a locked lock) the other side says unlocked (or shows a little picture of an unlocked lock). Make sure the switch is in the unlocked position and reinsert it properly into the camera.

This will fix your problem. Thanks for coming to FixYa. Let me know if I can be of anymore help. Don't forget to rate my answer a fixya!

Rob

Try removing the SD card from the camera and slide the lock switch on the side of the card to the unlock position.

I noticed that this camera does not work well with cheaper memory cards. The only brand that works without fail is the SanDisk brand.