Can i hook up to my satelite dish direct or do i have to go thru my receiver first. Thanks; Delmar [email protected]

Are you connection to the satellite input on the outside of the coach or the park cable input? If you are connecting to the park cable input it will not work since that wire is connected to a booster/splitter. Try running the wire through the window directly from the dish to the receiver. If that works then you need to install a dedicated satellite connection from the outside to the inside or purchase a flatwire to run through the window. If it does not work then the issue is in your satellite settings.

I would first see if set works with a DVD etc directly hooked to one of the rear audio/video inputs.

If so I would next unplug the dish box and wait and then power it up again to see if it will reboot and cure this issue--you can also contact them....

If getting the on screen Menu but nothing else it is either a signal issue or a problem in the set---If using a receiver also reboot it as well.

You require a satelite decoder/receiver for your dish and an aerial for your TV.
The choice is yours. Plug a satelite receiver, for freesat, into the A/V input on the TV or have an aerial installed for freeview.

You can use a direct sat ,but u wud need the dish LNB.

You may have a bad port on the back of the receiver, a cut or disconnected wire somewhere on that side of the system or a bad diplexer if the system is not straight wired to TV2.
The easiest way to verify whether the port on the receiver is bad is to connect that line directly to TV 1 off the back of the receiver. Remember to place TV one on the CHANNEL TO CHECK IF IT IS GOOD. If you have picture then you have a bad diplexer.

Hope this helps. Thanks for using Fix Ya.

usersmanualguide.com/philips/home_audio-video__dvd_recorders/dvdr72_17

Do you have the satelite hooked threu the regular cable input? If so hook it thru one of the video inputs instead; composite video or component video. the picture and sound will be better and you will be by-passing the problem area of your Tv ( the tuner).

this is not so easy to do.you have to read a lot to become familar with the terminology involved.you can start by googling fta on the internet.through some of the sites you will get the information you seek.or you can point dish to the various satellites and test the signals to see if you get what you are looking for.

how do i hook my dvd player throught the surrond sysytem