Hotpoint sy36x grill element works fine but when switched on to oven it doesnt heat up, fan working.

check thermostat for open,,,otherwise change element

its possible that your element has blown

You to check the element with a meter to ensure if you are getting a sapply to it, if you are, then the new element is faulty, if no supply, then probably ythe thermostat is faulty, also check for broken or bad conn ections.

You need to replace thje oven element, located behind a removeable cover at the rear of the oven compartment.
Good luck.

Hi.
Frpm the sympton's you list, I would say that the main oven element has failed, espsecially if the fan is working o/k.
The element is located at the rear of the oven compartment behind a removeable cover.
In addition to the grill elements in the top oven compartment, there is an additional base element which you can't see.
If you turn the top oven on, the base of the compartment should get hot, if it does not, then the base element has probably failed.
Hope this helps.

You need to ascertain that the components are getting a supply to them.
You will have to remove the oven from the housing, and remove the rear cover to check for supply to fan and element.

If it is heating, but not getting hot enough, then it is possible the thermostat is cutting the element off too soon, in this event, you will need to replace the thermostat.
If it is not heating at all , then the element is probably faulty.
Please rate my solution.
Thanks.

IT SOUNDS LIKE THE HEATING ELEMENT HAS BURNT OUT . REPLACE IT AND YOUR OVEN WILL WORK FINE.

If the oven fan is working o/k, then it is probably the oven element that is faulty, and you will need to replace it.
Please rate my solution.
Thanks.

The fan oven element needs to be replaced in the Hotpoint 6150 cooker.
Access is by removing the inner rear cover of the oven, there you will see the element.
Replace with a new one.


It is possible the base element is faulty in the top oven of the Hotpoint EW95,
The other possibility is that the high speed grill element is only part working.You need to check both these elements.
If the fan is working o/k in the main oven , but not getting hot, then you need to replace the element.
If it does heat, then it could be a faulty thermostat or possibly selector switch.
Unless you have a good working knowledge of electrics and know how to use a meter, then I would suggest you call some one in.
Plz rate my solution
Thanks.