I have just been given a Panasonic microwave (NN-E255W)but have no idea how to program the clock, no manual either

https://www.manualslib.com/products/Panasonic-Nn-St652w-3493267.html


Panasonic NN ST652W Manuals

To set the clock, press Timer/Clock twice when the microwave is not in use. The colon between the hour and minutes should start to blink. Type the current time (12-hour clock) with the appropriate number key pads. To save the time and exit the clock set mode, press Timer/Clock once more. Note: if you take too long to begin typing the time, the microwave may exit the time set mode. In that case, the colon will stop blinking. None of the other features of the microwave will work when the colon is blinking.

This is shown on page 11 of the manual which is available on the Panasonic NN-SA651S support page: http://shop.panasonic.com/support-only/NN-SA651S.html . The direct link to the manual is currently ftp://ftp.panasonic.com/microwaveoven/om/nn-sa631_nn-sa651_nn-sa661_en_om.pdf .

I hope this helps.

Cindy Wells

To set the clock, you need to press Timer/Clock twice. Then press the 10 Min keypad several times until you get to the correct hour. Then press the 1 Min keypad as needed to get to the closest 10 minute period below the current time. Finally press the 10 Sec keypad several times to reach the current time. Then press Timer/Clock once to exit the time set feature.

Panasonic has the manual for the NN-E271WM on their downloads page: http://www.panasonic.eu/Downloads/en_GB/popup.html . Enter the model number and then click View. You will need to accept the Panasonic Terms Of Use and click View again. The direct link to the manual is currently http://tda.panasonic-europe-service.com/docs/2z5845f124z3z39cabz656ez706466z25z9709ff8b3ba329b0c218b9bf248a6442e93022b3/tsn3/data/ALL/NNE281BMBPQ/OI/912715/NN-E271WME281BME281MM.pdf . See page 21 in the manual (23 in the PDF) to see the procedure.

I hope this helps.

Cindy Wells

Hi Alison.... push the clock button and then set the time AND THEN push the clock button a second time. That's it.

Normally you can download manuals (or similar ones) here.

Your model is not showing up but it may be older.

If it's a non-US model, visit here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Sounds like you disabled the clock function. If you do not have the user manual, you can get a copy at this website and use the function keys to reactivate and set the clock...

http://safemanuals.com/user-guide-instructions-owner-manual/PANASONIC/NN-H264-_E

I belive the information you seek is on page 12 of the manual.
Hope that helps...

English: http://panasonic.ca/PDP/OperatingInstructions/nns513-523-533_en.pdf

Multi-lingual: http://panasonic.ca/PDP/OperatingInstructions/nns512-522.pdf

We're happy to help and we appreciate your thoughtful rating of our answer.