What do i need to do to make my arm205 a network printer?

you can download driver from here
http://www.sharp.net.au/product-archive/products/ARM205/
click on attachments
then click on software and drivers
select your operating system and clik on go.

you can find the sharp AR-M205 driver here:
http://www.sharp.net.au/product-archive/products/ARM205/
click on attachments then on software and drivers
after that select your operating system and click on go.

If CH flashing reinstall your toner cartridge properly if not that mean you have an open door close it.

Drivers for Sharp AR-M205 are available at Sharp Official Support site Click here and make selection as under: -

Select
ARM205 > Windows 2000

Hope this helps! Dont forget to rate the solution!!
CreativeTECH

It requires an optional AR-NB2N network box that fits on the back of the machine and plugs into the USB of the copier. It will be obvious and clearly labeled if it is there.

Follow this link and you should find what you need. There is english description for the drivers so you should be ok.

http://esupport.sharp-eu.com/html/driver/index.php?StartRec=0&ListLimit=20&Lang=RU&ProdLine=34&SortOrder=DESC&OrderBy=Title&SearchString=AR-5316&OS=%&EMU=%&TemplateLang=ru

Alternatively try using from the uk sharp website www.sharpdirect.co.uk and download the ARM205 drivers. They may work for you.

Good Luck

I guess you are looking for Sharp ARM 205 drivers, if so, here's the link. (click here), open the link and click the name of the driver corresponding to the name of the operating system, i.e. if your system's Operating System is Windows xp, click the name of the driver next to "Windows XP"

If you need further help, let me know.

Good luck.


Thanks for using FixYa.

main motor problem

This machine can only scan across a network when the Sharp network box is installed and 512mb extra memory is installed in the copier

i have need sharp ar-m205 printer software .