Aqua Vu underwater camera uses a four pin connector to connect the infrared camera cable to the monitor. The cable wire colors are black,white,red & green. I need to know what color wire connects to what pin on the four pin connector?
I figured it out:
Here goes: There are 4 wires inside the Aqua Vu cable that runs to the underwater part of the cam.
Red = Hot or 12 volt power from battery postive (red) terminal
Black = Ground - ground to battery negative terminal
White= Video input (or center of video coax)
Green= Infrared lighting control, if you ground the green wire against the black/ground, you will see
that it switches ON the infrared or "Christmas" lights. Simply put a switch on the green wire after you ground it, so you can switch your IR's on and off.
Here is a pinout from the connector
4,268 views
Usually answered in minutes!
Has a pinout been found for this four pin connector for the Aqua Vu
I have the same problem.
×