Aqua GPS - Recent Questions, Troubleshooting & Support


i was having the same prob. so i cut the male conector part off the the camera cord and cut like 4" of the black cord part off to expose the wires. there will be 4 colored wires and 1 bare wire cut the bare wire off as close as you can to where you stripped off the black part, then expose the top inch of each color wire. OK now open up the back of the monitor, take the black female connector off you dont need it. you will see a 4 prong female connector part inside cut that off too, then conect the wires black - black / yellow - white / red - orange (i think it was orange) / blue - green . it sounds kinda complicated, but really easy, and now it works great! make sure you use electrical tape or something over bare wires

Aqua -Vu Perch... | Answered on Mar 05, 2011


i figgured out how to fix it. i was having the same prob. so i cut the male conector part off the the camera cord and cut like 4" of the black cord part off to expose the wires. there will be 4 colored wires and 1 bare wire cut the bare wire off as close as you can to where you stripped off the black part, then expose the top inch of each color wire. OK now open up the back of the monitor, take the black female connector off you dont need it. you will see a 4 prong female connector part inside cut that off too, then conect the wires black - black / yellow - white / red - orange (i think it was orange) / blue - green . it sounds kinda complicated, but really easy, and now it works great! make sure you use electrical tape or something over bare wires

Aqua -Vu Perch... | Answered on Jan 25, 2011


mike if you are still having this problem, i figgured out how to fix it. i was having the same prob. so i cut the male conector part off the the camera cord and cut like 4" of the black cord part off to expose the wires. there will be 4 colored wires and 1 bare wire cut the bare wire off as close as you can to where you stripped off the black part, then expose the top inch of each color wire. OK now open up the back of the monitor, take the black female connector off you dont need it. you will see a 4 prong female connector part inside cut that off too, then conect the wires black - black / yellow - white / red - orange (i think it was orange) / blue - green . it sounds kinda complicated, but really easy, and now it works great! make sure you use electrical tape or something over bare wires

Aqua GPS | Answered on Jan 25, 2011


no idea what that is or what it's for, the only thing understandable there is GPS and how do I get it to work not sure what it's for or what it is a part of. need more details.

GPS | Answered 20 hours ago


Hey, Ronald will you plz tell me about od and what is used for?

GPS | Answered Yesterday


Pose the question and model to google

GPS | Answered 2 days ago


password is 227

GPS | Answered on Jun 10, 2019


possibilities:

-are you charging from an electrical outlet or a USB plug on a computer/device? use outlet if possible. also try different cable. some cables are charging only where some are charging & data
-inspect casing to see if it has any cracks where moisture could enter. try placing in a warm dry environment in case moisture has entered the case
-also sounds like buttons could be stuck.


https://buy.garmin.com/en-US/US/p/126596#specs

GPS | Answered on Jun 10, 2019

Not finding what you are looking for?
Aqua Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Top Aqua GPS Experts

Marvin
Marvin

Level 3 Expert

84949 Answers

The Knight
The Knight

Level 3 Expert

76054 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

27218 Answers

Are you an Aqua GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...