No picture it has sound i chaned the cables to see if it was that but still no picture

Read manual and follow instructions.Or go to menu select Tuner
Selet cable or antena and the channels

A simple web search for "sram x9 cable replacement" finds procedures.

check your speaker wiring, make sure both terminals are connected properly. or could just be left speaker is disconnected. and is set in stereo mode which will only play left and right front and Sub, if you have one. try chaning the surround mode to play in multi channel speaker which will send sound to all speakers. i trust your using a Digital audio cable from your source ( cable box, DVD player) if your using analog audio cable you will only get stereo sound, and nothing will ever come out of the rear speaker unless you change the surround mode to multi- channel speaker. also in the setup menu you should be able to perform a speaker setup, make sure all your speakers are able to produce sound. follow speaker setup mode in menu, make sure you have checked the boxes or Yes to speaker you have in your system. then perform calibration and a test tone will come out of each speaker as you select them.

u should chane your mms settings

has feed cable to brake sensor touched wheel and worn through? which then earths out setting light off

Sounds like a bad battery to me. If you have a DC voltmeter you can check the battery.

sounds like your shift cable is starting to seize to the casing around it..

I think u are using the component out to view, right.
First of all see whether u can see a yellow color RCA jack labeled video out.
Try using tht output and post back

If you are unable to get video when connecting the DVD player using the Yellow, Red and white cables then is more likely that your LCD might be defective. I would suggest to call the manufacturers for additional technical support and if your LCD is less then a year old ask them to fix it under warranty.

get a reciever and then get componet cables then hook it all up through the hdmi cables