Will not print photo. Asks for card. Need to print from computer, not from photo card. It has worked in the past.

Not necessarily. Can you download the images from the card reader in you computer If you can then do that THEN format the card

Check your default printer It sounds like its set to a virtual printer. You might need to reload some or all drivers for your printer and make it your default printer. (Start menu-Devices and Printers)

I know that they charge for this (it's only like ten bucks) but the verizon store has a machine that will move all info from one phone to another or to USB/SIM card regardless of the carrier. Go there and you'll be ok : )

You need to use the computer software to scan it, crop it and save it. This way you don't need to send it to the computer, as the computer does the thing through the software.

Hello!
You can print photos from your computer too. Usually, people use memory cards from their digital camera, when they want to print photos directly from the memory card. If you do not have a digital camera or any other device that uses a memory card (i.e. a mobile phone), I am not sure you need one in order to print photos. However, here is the answer to your question:
You can use several memory cards in your printer, but only one memory card at a time! You can use:

• SmartMedia, xD-Picture Card (fits in bottom right of the slot)
• Memory Stick, Magic Gate Memory Stick, Memory Stick Duo (with user-supplied adapter), Memory Stick Pro
• CompactFlash (I, II)
• Secure Digital, MultiMediaCard (MMC)

Here is a picture, so you can see how to install them:



You can buy either one of these memory cards, it's up to you to decide which one you want.
Hope that helps!

Use a separate card reader to download your pics to a computer...then, format the card in the camera.

Normal 0 Could have a corrupt driver.
Disconnect the printer or at least be sure it is turned off. I'd do both and when the CD software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

connect your harware,open my computer,your cam' or card should be in list,double clickit,open folder labled ##(or letter)123....(numbers)
select all jpegs,copy to your comp!!

Do this, press and hold the "Stop" button on the printer for 10 seconds that should clear the fault set by the empty ink cartridge.

Hi
I have the same problem - how do I get it to print it says READY and its connected to my CPU via a SCSI card 50 pin NOW WHAT???? Do I need to install something else - do I need to use a specific program????