Leapster2 shows low battery but the batteries test

Hi,
When you first time connected your Leapster 2 to your PC using LeapFrog Connect, first of all, the software need to be updated both on the PC and in the console. It will takes times for at least 10-20 mins for it to complete the update. You have to wait until the status show "connected".
Sometimes, it will takes longer. So, what I did before is uninstall the LeapFrog Connect and reinstall it. It works perfect after that. Hope it helps.

BTW, you can get more downloadable games for your Leapster 2 here:
leapster-2.blogspot.com

Welcome to FixYa!



Ensure NO GAME is in unit
Power Unit off
While turning Leapster 2 on, hold down HINT KEY. (Key in middle with question mark on left hand side)

Once unit switches to other menu, Hit A to begin calibrating.
Follow prompts with Sylas pen to reprogram Stylus pen.
Once you are done it will return to original Calibrating Menu.
Power Unit off Turn unit on with game inserted. Stylus pen should respond.



1) Ensure that a cartridge is not inserted

2) Hold down the Hint (?) button while turning the unit on. Continue to hold the Hint button down until the LEAPSTER menu appears. 3) When the LEAPSTER menu screen appears, press the A button 4) Touch each of the crosshairs that appear with the stylus 5) Restart unit


Do comment if it helped or not in any manner ill know.

This will only recharge the batteries approx. 300 times! After that it is useless! I had to throw mine out because it would no longer hold the charge. Save your money and just buy regular rechargeable batteries.
but to answer your question, no sorry it wont fit.
good luck!

You can try calibrating the stylus pen. Hope this works :) Here are step by step instructions straight from the Leapster2 website:

If your Leapster2 does not respond to the stylus pen, it needs to be calibrated. Calibrating the Leapster2 is easy:

1) Ensure that a game cartridge is not inserted in the Leapster2

2) Hold down the Hint (?) button while turning the unit on. Continue to hold the Hint button down until the LEAPSTER2 menu appears. Remember that you need to hold the "Hint" button down the whole time while you are pressing the power button, and releasing it.




3) The LEAPSTER2 menu will show the options Base Info, Cart1 Info, Cart2 Info, Cart3 Info, and Touch Calib. If you do not see this menu after powering on the Leapster2, turn the Leapster2 off and repeat steps 1 & 2 until you see the menu.






4) When the LEAPSTER2 menu screen appears, press the A button on your handheld.

5) Using the stylus pen, touch each of the crosshairs that appear

6) Restart unit

You can try calibrating the stylus pen. Hope this works :) Here are step by step instructions straight from the Leapster2 website:

If your Leapster2 does not respond to the stylus pen, it needs to be calibrated. Calibrating the Leapster2 is easy:

1) Ensure that a game cartridge is not inserted in the Leapster2

2) Hold down the Hint (?) button while turning the unit on. Continue to hold the Hint button down until the LEAPSTER2 menu appears. Remember that you need to hold the "Hint" button down the whole time while you are pressing the power button, and releasing it.




3) The LEAPSTER2 menu will show the options Base Info, Cart1 Info, Cart2 Info, Cart3 Info, and Touch Calib. If you do not see this menu after powering on the Leapster2, turn the Leapster2 off and repeat steps 1 & 2 until you see the menu.






4) When the LEAPSTER2 menu screen appears, press the A button on your handheld.

5) Using the stylus pen, touch each of the crosshairs that appear

6) Restart unit

You can try calibrating the stylus pen before trying to replace it. Hope this works :) Here are step by step instructions straight from the Leapster2 website:

If your Leapster2 does not respond to the stylus pen, it needs to be calibrated. Calibrating the Leapster2 is easy:

1) Ensure that a game cartridge is not inserted in the Leapster2

2) Hold down the Hint (?) button while turning the unit on. Continue to hold the Hint button down until the LEAPSTER2 menu appears. Remember that you need to hold the "Hint" button down the whole time while you are pressing the power button, and releasing it.

3) The LEAPSTER2 menu will show the options Base Info, Cart1 Info, Cart2 Info, Cart3 Info, and Touch Calib. If you do not see this menu after powering on the Leapster2, turn the Leapster2 off and repeat steps 1 & 2 until you see the menu.

4) When the LEAPSTER2 menu screen appears, press the A button on your handheld.

5) Using the stylus pen, touch each of the crosshairs that appear

6) Restart unit

Try to calibarte it:
Calibrating the Leapster2 is easy:

1) Ensure that a game cartridge is not inserted in the Leapster2

2) Hold down the Hint (?) button while turning the unit on. Continue to hold the Hint button down until the LEAPSTER2 menu appears. Remember that you need to hold the "Hint" button down the whole time while you are pressing the power button, and releasing it.

3) The LEAPSTER2 menu will show the options Base Info, Cart1 Info, Cart2 Info, Cart3 Info, and Touch Calib. If you do not see this menu after powering on the Leapster2, turn the Leapster2 off and repeat steps 1 & 2 until you see the menu.

4) When the LEAPSTER2 menu screen appears, press the A button on your handheld.

5) Using the stylus pen, touch each of the crosshairs that appear

6) Restart unit


Source:
http://leapfrog.custhelp.com/cgi-bin/leapfrog.cfg/php/enduser/std_adp.php?p_faqid=1736&p_created=1221582020&p_sid=DqRj3Kxk&p_accessibility=0&p_redirect=&p_lva=1725&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NCw0JnBfcHJvZHM9MjkxMyZwX2NhdHM9JnBfcHY9MS4yOTEzJnBfY3Y9JnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9Y2FsaWJyYXRl&p_li=&p_topview=1

you can buy it at the store you bought the leapster ask the sales lady and show the item that you bought and tell them what you have lost..

at the bottom of the toy,near the headphone jack are brightnest control and contrast conytrol buttons.there u can set brightnest that is good for u.

Answer
I had the same problem and here is the answer I found at leapfrog.com which fixed my daughter’s disney princess leapster 2’s problem. Good luck!
If your Leapster2 does not respond to the stylus pen, it needs to be calibrated. Calibrating the Leapster2 is easy:
1) Ensure that a cartridge is not inserted
2) Hold down the Hint (?) button while turning the unit on. Continue to hold the Hint button down until the LEAPSTER menu appears.
3) When the LEAPSTER menu screen appears, press the A button
4) Touch each of the crosshairs that appear with the stylus
5) Restart unit