Where is the serial number on the CAMCORDER FS200

Hope you have found your serial number by now!

http://community.sony.com/t5/Camcorders-Action-Cam/ImageMixer-Download-for-Handycam-DCR-DVD101/td-p/18205

On the bottom of the camers on the battery door there is a sticker with some letters and numbers. The serial number is the first 12 numbers that are listed on the first 3 rows. No letters at all.

The serial number is on the bottom of the camcorder.If you simply want to install the software for a camcorder, you can tell the installation program the model and serial number of any camcorder from the same manufacturer.

the first 2 letters are not part box the serial number....just enter the numbers only

Hi,

You can look for the serial number either under the camera or behind the battery.
These are the normal places to find the serial number.

Let me know if this solved your problem!

Regards

When you are typing in the serial number, ignore the last two letters. Type only the digits.

The manual does not say that the camera must be plugged into a power adaptor. Then press the playback mode button below the lcd screen. Select PC/Printer and you will be hooked up

Check the bottom of the camera or behind the battery. Also, The SD software that comes with the recorder has a little glitch (ONLY with the colored units; the blue and red) when entering the serial number to register the software it doesn't recognize the serial number from the unit. You actually have to change the first 3 numbers from 822 to 808 to get the serial number to accept. I found this from an earlier review on this site.

I had a hard time finding it too. Finally figured out that its the 12 digit number written:
XXXX
XXXX
XXXX
on the tag that stuck to the battery door

It's listed on the Canon warranty card that came with it. Hope that helps.