Printer stop printing at first half page

Press and hold the cancel button and then press the start copy button release them together.

You should print a test page. No Test page an internal printer problem is likely!

If test page is good reset the spooler \. More than one way to reset spool file. Spool file controls transfer from computer to printer. Spool file a mess then printer hangs!!!


Method 1
a. Go to Start / Control Panel / Administrative Tools / Services
b. Select "Print Spooler".

c. While Print spooler is stopped, start it by double-clicking on "Print Spooler" and then click the "Start" button.

d. Verify that the "startup type" is set to "automatic".

Method 2
Create a new txt file
Type in exactly as the following text:

net stop spooler
del %systemroot%\system32\spool\printers\*.shd
del %systemroot%\system32\spool\printers\*.spl
net start spooler

Rename txt file killspool.bat

save on desk top
Double click off of desktop file to run

Next time printer hangs you can use this file again

Hope this helps?

An Alignment Page Prints Every Time the All-in-One is Turned On or Off or a Print Job is Started

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00473766&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN

when you click print one small folder is open and asking to you to print. in there you can see the size of pirnting you can adjust and print

copy and past your page 1 content in a new file and try print

my system ever thing is ok,but once i put paper displaying a out of paper,how 2 resolve this problem

Hi Siddarth

In HP PSC 1315 printer after replacing new Ink Cartridges the printer always prints Alignment test page every time you turn it ON.To resolve this problem you must complete the alignment process.

Steps

1.Turn the printer ON.
2.Once its ON, it will print the Alignment page. Place the page in the scanner bed correctly.
3.Then Press START SCAN button.
4.The power light will start blinking, wait until the power lights turns solid.
5.Now Alignment process is over.Discard the paper from scanner.
6.Turn the printer OFF and then ON, it will not print that page again.

Note:Please follow this steps every time when you replace the Cartridges.

Thanks
Rizwan
[email protected]

my printer no function cant print

Hello Sir,

I would like to provide you few workaround steps, you may try to improve the printing speed on the computer.

Delete all the Temporary files:

For Windows XP:
(1) Click Start >> In the Run window, type "%temp%" which opens temporary files folder.
(2) Delete all the files that are listed over there.

If Windows Vista:
(1) Click Start >> Programs >> Accessories >> In the Run window, type "%temp%" and press enter.
(2) Delete all the files listed under temporary files folder.

Another Workaround:
(1) Click Start >> Printer and Faxes.
(2) Right click on the Printer icon which is set as default and select properties.
(3) Click on Advance Tab.
(4) put a check mark on "Print Directly to printer" option.
(5) Click Apply and Ok.

Hope this solution would be helpful in resolving the issue that you are experiencing.

With Regards,
Ashesburn..

Hi!!
Remove the installed printer driver and re-install the driver from its cd... To fix the problem on one of its files or to fix a virus-infected file

Fixya!

Re: HP PSC 1513 all in one by Bert (9/25/07 1:07 PM) reply + / - http://h10025.www1.hp.com


Re: Re: HP PSC 1513 all in one test page always pr by Anonymous (12/12/07 6:14 AM) reply + / - Subject : How to disable the test page that always prints when you switch on the HP PSC 1513 all-in-one printer.

Take the test page ( also called : alighnment page ) that always prints when you switch on the printer and place it face down in the scanner.

Then press the scan button on the printer itself.
(this is the button at the bottom of all the buttons on the printer/scanner.)

Make sure that the printer scans the test page.
( sometimes you press the butoon and it doesn't scan )
( it makes a scanning noise when scanning succesfully )


Then it will stop printing the test page ( alignment page ) ever again.

This is a really stupid product feature on HP's part to waste ink and force people to buy more cartriges.


[email protected]