Player not recognised by the computer - Samsung YP-K3 MP3 Player

reinstall firmware of player

go to my computer icon on desktop !
click right mouse go to proberties --- system or device ---device management --- there you can solve the problem .
rate please !
best regards .

download and install the firmware for your mp3 player on your windows xp operating system and then it should work fine heres the link to get the firmware

You need to have Windows Media Player 11 instaled or else it won't recognise it.

Uninstall all of the Nokia-related software on the affected computer, reinstall it, and THEN plug it back into your computer.

I think ur computer is not recognising ur player try to reinstall the software you get with the installation CD try it once more
or use media monkey it recognises all players
ThankU

The ONLY AND I REPEAT ONLY way to solve zen and computer recognistion problem is to have THE ORIGINAL INSTALL DISK that came with player.
The only things that will work is
1. Download Utorrent 2. Go to google or yahoo and search Creative (you'r player type ie zen touch, zen mossiac, zen x, etc.etc.) install disk torrent. 3. Try to find the one that is closest to the name of your player (ie. zen touch, mossiac, x) and download the install disk. 4. After the download finishes you should be able to run setup like you have the disk.
I downloaded the install disk torrent and after i finished downloading I simply found the setup file clicked it and installed the neccessary files, and presto my computer recognised my zen touch.
#2 If you can't find a install disk for you perticular player, you should try to see if maybe a friend or someone youknow has a creative mp3 player and ask to borrow there install disk, who knows it just might work for you'r player. Best of luck and I hope this will solve you zen player/computer problem

Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard

try to connect it to another computer see wat happens if it recognises it format it

Connect the player to the power adaptor and connect to the PC.

On the player press and hold "Power" & "Vol +", this should reset the player.

Wait for PC to recognise player.

If this doesn't work try the following:

Connect the HDD6330 to the mains adaptor and the PC.

Before the computer has a chance to recognise the player, press "Power" and "Vol +" to reset the player.

As soon as the player resets (screen goes blank) press and hold "Vol -" until the PC recognises the player as a removable drive.

Try to access the player through "My Computer" as you would the main hard disk.

If the computer recognises the player, then it can be restored by copying the system files directly on to the player.